SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Eastbourne

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Eastbourne

Positioned on the East Sussex coast at the southern terminus of the A22 and A27 trunk corridors, Eastbourne supports a thriving concentration of precision engineering, dental product manufacturing, plastics extrusion, wholesale trade distribution and public sector archiving. Major industrial warehousing and institutional storage facilities operate across Eastbourne District General Hospital (East Sussex Healthcare NHS Trust), Eastbourne Borough Council Town Hall Grove Road, Highfield Industrial Estate, Brampton Road Trading Estate and Hammonds Drive Commercial District. Freight and regional distribution vehicles access the town via the A22 Golden Jubilee Way, the A27 Polegate Bypass via the A22, the A259 Seaside corridor, the A2270 Willingdon Road and the B2104 Langney Rise. Eastbourne's commercial economy is powered by light engineering, plastics extrusion and packaging materials across Highfield Industrial Estate and Brampton Road Trading Estate, alongside dental product manufacturing and precision dental laboratory tools at Hammonds Drive Commercial District. In the public and professional sectors, major repositories manage NHS acute clinical health records and outpatient physiotherapy files at Eastbourne District General Hospital, borough council planning applications, deeds and coastal defence registers at Town Hall Grove Road, and legal practices, conveyancing deeds and private estate testaments. These commercial hubs serve surrounding towns including Polegate, Hailsham, Seaford, Newhaven, Bexhill-on-Sea,Pevensey, Lewes and Heathfield. Storage racking across Eastbourne faces varied operational stresses: trade and manufacturing units on Brampton Road, Highfield and Hammonds Drive operate narrow-aisle adjustable pallet racking and cantilever frames in compact warehouses where frequent reach-truck and counterbalance manoeuvres cause lower upright impacts and displaced beam clips, making annual SEMA racking inspections essential.

All warehouse duty holders, engineering and plastics manufacturing directors and public sector facilities managers in Eastbourne must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including adjustable pallet racking, cantilever racking, multi-tier shelving and mobile archive systems—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. In Eastbourne's busy manufacturing and trade estates at Highfield, Brampton Road and Hammonds Drive, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.

When our SEMA Approved Rack Inspectors audit storage systems in Eastbourne, every defect is classified using SEMA's formal Red, Amber and Green risk grading framework to provide clear engineering priorities. During our physical inspection, we measure upright verticality and bracing integrity over a one-metre gauge length against strict SEMA limits: maximum permissible deformations are 3 millimetres down-aisle, 5 millimetres cross-aisle and 10 millimetres of twist, while beam deflection under load must not exceed 1/180th of the clear span. Where severe mechanical impact, sheared baseplate anchors or permanently bowed beams create an immediate threat to structural stability, we issue a Red risk notice; the affected bay must be offloaded immediately and physically cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without presenting an immediate collapse hazard under current static loads, an Amber risk rating is assigned. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic marks within allowable tolerances are recorded as Green risks for monitoring during future audits. Our comprehensive written report includes bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, alongside practical guidance at https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.

To book an independent SEMA-approved racking inspection in Eastbourne, South East, call Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide