SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Falmouth

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Falmouth

Commanding one of the world's deepest natural harbours on the south coast of Cornwall, Falmouth is a premier UK centre for commercial ship repair, naval engineering refits, marine electronics manufacturing and port logistics. Major industrial warehousing and institutional archive facilities operate across Falmouth Hospital (Cornwall Partnership NHS Foundation Trust), Cornwall Council / Town Council The Moor Municipal Offices, Falmouth Docks Marine Operations Estate, Tregoniggie Industrial Estate and Bickland Industrial Park. Marine supply chains and regional freight fleets connect via the A39 Dracaena Avenue, the A393 Sandy Lane, the A30 via the A39 at Carland Cross, the B3292 Penryn bypass corridor and the B3314 Bickland Water Road. Falmouth's industrial economy is anchored by ship repair, naval engineering and marine refit spares at Falmouth Docks Marine Operations Estate, alongside electronic marine instrumentation and fabrication tooling across Tregoniggie Industrial Estate and Bickland Industrial Park. In the public, maritime and academic sectors, local repositories manage harbour authority records, shipping logs and maritime charts, art and design university creative archives and portfolio stores, and NHS community hospital clinical treatment records at Falmouth Hospital. These commercial zones connect directly with surrounding towns including Penryn, Truro, Helston, Redruth, Camborne,Porthleven, Mylor Bridge and St Mawes. Racking installations across Falmouth face severe environmental and mechanical demands: dockyard engineering stores at Falmouth Docks and fabrication units at Tregoniggie and Bickland store heavy marine propulsion shafts, steel plate, hydraulic winches and palletised chandlery on heavy-duty cantilever racking and adjustable pallet racking in humid, salt-laden coastal air where corrosion and forklift impacts make annual SEMA racking inspections essential.

All warehouse duty holders, dockyard engineering directors, marine equipment manufacturers and public sector facilities managers in Falmouth must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including adjustable pallet racking, heavy-duty marine cantilever racks, vertical sheet racks and archive shelving—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational or environmental conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. In Falmouth's heavy dockyard stores and industrial estates at Tregoniggie and Bickland, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.

Our SEMA Approved Rack Inspectors provide Falmouth businesses with a rigorous, independent structural audit graded under SEMA's Red, Amber and Green risk classification system. During our physical inspection, we assess upright verticality, frame bracing, beam deflection, connector engagement and floor fixings against SEMA codes of practice. Over a one-metre gauge length, upright deformations exceeding 3 millimetres in the down-aisle direction, 5 millimetres in the cross-aisle direction or 10 millimetres of twist violate permissible tolerances, while loaded beams must not deflect beyond 1/180th of their clear span. When severe impact damage, corroded or sheared baseplate anchors, or critically buckled struts create an immediate danger of structural failure, we issue a Red risk notice; the affected bay must be offloaded immediately and cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without threatening instant collapse under current static loads, an Amber risk rating is applied. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic scuffs within allowable limits are recorded as Green risks for ongoing monitoring. Our detailed written report provides bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, supported by https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.

To schedule a SEMA-approved racking inspection in Falmouth, South West, call Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide