For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.
Situated at the head of Loch Linnhe beneath Ben Nevis at the junction of the A82 and A830 trunk corridors, Fort William is the industrial, aluminium smelting, timber processing, marine engineering and wholesale distribution capital of Lochaber and the West Highlands. Major industrial warehousing and public sector archive facilities operate across Belford Hospital, Charles Kennedy Building (The Highland Council), Ben Nevis Industrial Estate (Claggan), Blar Mhor Industrial Estate (Corpach) and the Alvance British Aluminium Smelter (Lochaber). Heavy haulage, timber lorries and regional supply fleets navigate the town via the A82 Fort William Bypass, the A830 Road to the Isles, the A86 Spean Bridge Road, the B8004 Banavie Road and the B8006 Corpach Road. Fort William's industrial economy is anchored by aluminium smelting, hydro-electric operations and industrial compliance at the Alvance British Aluminium Smelter, alongside timber processing, marine engineering and West Coast distribution at Blar Mhor Industrial Estate (Corpach) and tourism logistics, forestry support and Highland trade wholesaling across Ben Nevis Industrial Estate (Claggan). In the public sector, local repositories manage NHS Highland rural general hospital records and clinical archives at Belford Hospital as well as Highland Council Lochaber area administration and planning files at the Charles Kennedy Building. These commercial hubs serve surrounding communities including Corpach, Banavie, Spean Bridge, Ballachulish, Kinlochleven, Mallaig,Strontian and Oban. Storage racking across Fort William endures harsh West Highland conditions: smelter engineering stores, sawmill yards and builders' merchants at Corpach and Claggan store heavy aluminium billets, structural timber packs, aquaculture spares and bulk palletised provisions on cantilever and adjustable pallet racking, making annual SEMA racking inspections essential.
All warehouse duty holders, aluminium and hydro-engineering managers, timber processors and public sector archive leads in Fort William must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including adjustable pallet racking, heavy-duty timber and metal cantilever racks, drive-in blocks and archive shelving—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational or environmental conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. In Fort William's heavy industrial stores at Lochaber Smelter, Blar Mhor and Ben Nevis Industrial Estate, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.
When our SEMA Approved Rack Inspectors audit storage systems in Fort William, every defect is classified using SEMA's formal Red, Amber and Green risk grading framework to provide clear engineering priorities. During our physical inspection, we measure upright verticality and bracing integrity over a one-metre gauge length against strict SEMA limits: maximum permissible deformations are 3 millimetres down-aisle, 5 millimetres cross-aisle and 10 millimetres of twist, while beam deflection under load must not exceed 1/180th of the clear span. Where severe mechanical impact, corroded or sheared baseplate anchors, or permanently bowed beams create an immediate threat to structural stability, we issue a Red risk notice; the affected bay must be offloaded immediately and physically cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without presenting an immediate collapse hazard under current static loads, an Amber risk rating is assigned. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic marks within allowable tolerances are recorded as Green risks for monitoring during future audits. Our comprehensive written report includes bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, alongside practical guidance at https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.
To book an independent SEMA-approved racking inspection in Fort William, Scotland, call Rack Safety Inspections today on 0800 654 6955.
Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.