SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Gateshead

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Gateshead

Commanding the southern bank of the River Tyne along the A1 Western Bypass and A194(M) freight corridors, Gateshead is home to Team Valley and Follingsby Park—two of the North East's largest and most important hubs for high-bay e-commerce fulfilment, national logistics, precision manufacturing and wholesale trade distribution. Mega-warehouses, manufacturing plants and public sector archive facilities operate across Queen Elizabeth Hospital, Gateshead Civic Centre (Gateshead Council), Team Valley Trading Estate, Follingsby Park (Wardley) and the Metrocentre. HGV trunking and regional distribution fleets connect rapidly via the A1 Western Bypass (Team Valley / Lobley Hill), the A184 Felling Bypass, the A194(M) White Mare Pool, the A167 Durham Road and the A695 Scotswood Bridge. Gateshead's industrial landscape is anchored by national logistics, manufacturing, wholesale and North East distribution across Team Valley Trading Estate, alongside high-bay e-commerce fulfilment, parcel sorting and freight forwarding at Follingsby Park (Wardley) and regional retail management, leisure operations and consumer logistics at the Metrocentre. In the public sector, major repositories manage Gateshead Health NHS Foundation Trust acute medical and patient archives at Queen Elizabeth Hospital as well as metropolitan borough administration, housing and social care records at Gateshead Civic Centre. These hubs connect Newcastle upon Tyne, Washington, Hebburn, Jarrow, South Shields, Blaydon,Whickham and Chester-le-Street. Racking systems across Gateshead operate at immense 24/7 velocity: 16-metre VNA adjustable pallet racking, multi-tier robotic pick towers and heavy steel cantilever racks at Follingsby Park and Team Valley endure continuous turret truck and reach-truck shifts, making annual SEMA racking inspections essential.

All warehouse duty holders, e-commerce fulfilment directors, 3PL operators and public sector facilities managers in Gateshead must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including high-bay adjustable pallet racking, cantilever racking, multi-tier pick modules and archive shelving—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. In Gateshead's mega-distribution hubs at Follingsby Park and Team Valley Trading Estate, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.

When our SEMA Approved Rack Inspectors audit storage systems in Gateshead, every defect is classified using SEMA's formal Red, Amber and Green risk grading framework to provide clear engineering priorities. During our physical inspection, we measure upright verticality and bracing integrity over a one-metre gauge length against strict SEMA limits: maximum permissible deformations are 3 millimetres down-aisle, 5 millimetres cross-aisle and 10 millimetres of twist, while beam deflection under load must not exceed 1/180th of the clear span. Where severe mechanical impact, sheared baseplate anchors or permanently bowed beams create an immediate threat to structural stability, we issue a Red risk notice; the affected bay must be offloaded immediately and physically cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without presenting an immediate collapse hazard under current static loads, an Amber risk rating is assigned. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic marks within allowable tolerances are recorded as Green risks for monitoring during future audits. Our comprehensive written report includes bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, alongside practical guidance at https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.

To book an independent SEMA-approved racking inspection in Gateshead, North East, call Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide