SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Shrewsbury

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Shrewsbury

Shrewsbury serves as Shropshire's county town and primary commercial gateway to Mid Wales, where expansive business parks, agricultural machinery depots and regional distribution warehouses rely on structurally sound pallet and cantilever racking. Across Battlefield Enterprise Park, Monkmoor Industrial Estate and Harlescott Commercial Area, precision metal fabricators, agricultural dealers and wholesale trade distributors operate wide-aisle, narrow-aisle and heavy-duty cantilever racking systems supporting light engineering, sheet metal and mechanical tooling alongside agricultural machinery parts and veterinary records and wholesale trade and high-density inventory. Within the town's major healthcare and county governance estates, high-density mobile shelving and clinical consumable racking safeguard NHS acute surgical and medical documentation at Royal Shrewsbury Hospital (The Shrewsbury and Telford Hospital NHS Trust) and county administrative and historical land charge records at Shropshire Council Shirehall Abbey Foregate. Heavy goods vehicles serving Shrewsbury's northern and eastern industrial belt travel via the A5 Shrewsbury Bypass, the A49 Whitchurch Road, the M54 corridor via A5, the A5112 Battlefield Road and the A458 Welshpool Road. These strategic trunk routes link Shrewsbury directly with surrounding towns including Telford, Oswestry, Whitchurch, Market Drayton, Wem, Church Stretton, Much Wenlock and Welshpool. In sheet metal workshops and agricultural machinery stores at Battlefield Enterprise Park and Harlescott Commercial Area, storing heavy tractor components, steel sheet packs and dense trade consumables places high static loads on pallet beams and cantilever arms. At the same time, counterbalance forklifts and reach trucks operating in busy trade warehouses frequently strike lower upright legs and end-of-aisle frames. Commissioning an annual inspection from a SEMA Approved Racking Inspector ensures Shrewsbury's storage facilities remain safe and compliant.

For warehouse managers, agricultural engineering dealers and public sector duty holders in Shrewsbury, compliance with the Provision and Use of Work Equipment Regulations 1998 (PUWER) is a strict legal obligation. Under PUWER Regulation 5, every employer must ensure that storage racking and shelving—whether holding heavy machinery parts at Battlefield Enterprise Park, sheet metal stock in the Harlescott Commercial Area, or patient files at Royal Shrewsbury Hospital—is maintained in an efficient state, in efficient working order and in good repair. Because pallet and cantilever racking is exposed to mechanical handling collisions and cyclic loading stresses that can cause deterioration, PUWER Regulation 6 requires periodic inspections at suitable intervals by a competent person, with formal written records retained. The Health and Safety Executive's guidance publication HSG76, Warehousing and Storage: A Guide to Health and Safety, defines the mandatory three-tier inspection hierarchy required to satisfy PUWER. First, warehouse operatives and forklift drivers must report any rack strike or visible structural defect immediately. Second, an appointed Person Responsible for Racking Safety (PRRS) must carry out and log regular internal visual checks, normally weekly. Third, an annual expert inspection must be conducted by an independent specialist such as a SEMA Approved Racking Inspector. Failing to uphold this regime in Shrewsbury's engineering, agricultural and wholesale sectors risks HSE enforcement notices, invalidated insurance and prosecution.

Every SEMA racking inspection we conduct in Shrewsbury provides a thorough, engineering-led assessment of your storage infrastructure, grading each recorded defect under SEMA's traffic-light risk system. Using a one-metre straightedge on impacted upright columns and frame bracing, our SARI-qualified engineer measures whether deflections fall within SEMA's maximum permissible tolerances of 3 millimetres in the down-aisle direction, 5 millimetres in the cross-aisle plane and 10 millimetres on horizontal or diagonal bracing members. Components within these limits are graded Green, confirming the bay remains safe for full rated capacity while being logged for monitoring at the next annual cycle. Where structural distortion exceeds those thresholds, or where components such as beam safety locks or floor anchor bolts are missing without creating an immediate collapse hazard, the location is classified as Amber; under SEMA protocols, Amber bays must be offloaded within four weeks so certified manufacturer replacement parts can be installed, and any Amber defect remaining loaded after twenty-eight days automatically escalates to a Red risk. Severe damage—including deflections exceeding twice the SEMA tolerance, torn steel uprights or damaged beam connectors—is classified as Red, requiring immediate offloading and physical isolation of the bay. Our comprehensive written report includes bay-by-bay defect locations, load notice audits and compliance guidance referencing https://www.rackstor.co.uk/sema-racking-inspection-checklist.

To book your certified SEMA racking inspection in Shrewsbury or anywhere across the West Midlands, call Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide