SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Telford

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Telford

Telford is the primary manufacturing, polymer engineering and M54 logistics powerhouse of Shropshire, where sprawling industrial estates house high-volume automotive stamping plants, plastics moulding factories and automated distribution hubs. Across Stafford Park Industrial Estate, Halesfield Industrial Estate and Hortonwood Business Park, tier-one automotive suppliers, medical device moulders, defense logistics contractors and electronics distributors operate high-bay wide-aisle, very narrow aisle (VNA), drive-in and heavy-duty cantilever racking systems to support automotive components and metal stamping, plastics polymer molding and medical devices, and electronics assembly and high-density inventory. Within the town's major acute healthcare and unitary governance campuses, high-density mobile shelving, medical consumable warehouses and static archive racking safeguard NHS acute health documentation at Princess Royal Hospital (The Shrewsbury and Telford Hospital NHS Trust) and borough municipal planning and environmental archives at Telford & Wrekin Council Darby House. Heavy goods vehicles serving Telford's industrial estates move continuously through M54 Junction 4, M54 Junction 5, the A442 Queensway dual carriageway, the A5 Telford Way and the A4169 Castlefields Way. This high-capacity highway network connects Telford directly with surrounding towns including Shrewsbury, Wolverhampton, Newport, Shifnal, Bridgnorth, Ironbridge, Much Wenlock and Market Drayton. In automotive press shops and polymer moulding warehouses at Hortonwood Business Park, Stafford Park Industrial Estate and Halesfield Industrial Estate, storing multi-tonne stamping dies, steel coils, plastic granulate octabins and high-bay palletised assemblies places extreme point loads on pallet beams and cantilever arms, while 24/7 reach-truck movements create frequent lower upright leg impacts. Annual inspections by a SEMA Approved Racking Inspector are vital across Telford.

For automotive manufacturing directors, polymer plant managers and warehouse duty holders in Telford, compliance with the Provision and Use of Work Equipment Regulations 1998 (PUWER) is a mandatory statutory duty. Under PUWER Regulation 5, employers must ensure that all storage racking—whether holding heavy press tooling on Stafford Park Industrial Estate, polymer raw materials at Hortonwood Business Park, or medical archives at Princess Royal Hospital—is maintained in an efficient state, in efficient working order and in good repair. Because pallet and cantilever racking is exposed to continuous mechanical handling collisions and heavy cyclic loading that can cause structural deterioration, PUWER Regulation 6 requires periodic inspections at suitable intervals by a competent person, with formal written records retained. The Health and Safety Executive's guidance document HSG76, Warehousing and Storage: A Guide to Health and Safety, establishes the three-tier inspection hierarchy required to satisfy PUWER. First, warehouse operatives and forklift drivers must report any rack collision or visible structural defect immediately. Second, an appointed Person Responsible for Racking Safety (PRRS) must carry out and document regular internal visual checks, normally weekly. Third, an annual expert inspection must be performed by an independent specialist such as a SEMA Approved Racking Inspector. Failing to uphold this regime across Telford's automotive, plastics and electronics sectors risks HSE Prohibition Notices, invalidated insurance and prosecution.

When our SEMA Approved Racking Inspector visits a manufacturing plant, tool store or distribution hub in Telford, every racking bay and cantilever structure is assessed against SEMA's engineering tolerances and graded using the traffic-light risk system. Applying a one-metre straightedge to impacted upright columns and frame bracing, our SARI engineer verifies whether deflections remain within SEMA's permissible dimensional limits: 3 millimetres for an upright bent in the plane of the beam, 5 millimetres for an upright bent in the plane of the frame, and 10 millimetres for horizontal or diagonal bracing struts. Items within these limits are graded Green, confirming the bay is safe for continued full-load service while being logged for monitoring at the next annual cycle. Where structural distortion exceeds those thresholds, or where essential components such as beam locking pins or floor anchor bolts are missing without creating an immediate danger of collapse, the defect is classified as Amber; under SEMA protocols, Amber bays must be unloaded within four weeks so certified manufacturer replacement parts can be installed, and any Amber defect remaining loaded beyond twenty-eight days automatically escalates to a Red hazard. Critical damage—including deflections exceeding twice the SEMA tolerance, torn upright profiles or disengaged beam connectors—is classified as Red, requiring immediate offloading and physical isolation of the bay. Our comprehensive written report includes bay-by-bay defect locations, load notice audits and compliance guidance linked to https://www.rackstor.co.uk/sema-racking-inspection-checklist.

Book your certified SEMA racking inspection in Telford or anywhere across the West Midlands by calling Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide