For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.
Weston-super-Mare is the primary commercial and manufacturing centre of North Somerset, strategically located off the M5 motorway and supporting active aerospace engineering, packaging manufacturing and regional distribution sectors. Across Winterstoke Commercial Park, Oldmixon Crescent Industrial Estate and the Weston Business Quarter, helicopter maintenance suppliers, injection moulders, packaging converters and trade wholesalers operate wide-aisle, narrow-aisle and cantilever racking systems supporting helicopter structural maintenance and aerospace archives, light manufacturing, injection moulding and metal pressing, and packaging materials and commercial inventory storage. Within the town's major healthcare and unitary governance estates, high-density mobile shelving and clinical supply racking safeguard NHS general hospital medical records and patient charts at Weston General Hospital (University Hospitals Bristol and Weston NHS Foundation Trust) and unitary council municipal planning, coastal defense and tax records at North Somerset Council Town Hall Walliscote Grove Road. Freight and service vehicles serving Weston-super-Mare's industrial zones travel via M5 Junction 21, the A370 Somerset Avenue, the A371 Locking Moor Road, the B3440 Bridgwater Road and the A38 corridor via A371. This road network connects Weston-super-Mare directly with surrounding towns including Clevedon, Portishead, Burnham-on-Sea, Highbridge, Cheddar, Winscombe and Yatton. In aerospace supply warehouses on Winterstoke Commercial Park and busy packaging stores on Oldmixon Crescent Industrial Estate, storing heavy helicopter components, dense plastic injection tooling and bulk packaging reels imposes high static loads on pallet beams and cantilever arms. At the same time, counterbalance forklifts operating in compact factory aisles frequently strike lower upright legs. Commissioning an annual inspection from a SEMA Approved Racking Inspector ensures Weston-super-Mare's storage facilities remain structurally sound and legally compliant.
For aerospace engineering directors, manufacturing managers and public sector estate teams in Weston-super-Mare, compliance with the Provision and Use of Work Equipment Regulations 1998 (PUWER) is a strict statutory requirement. Under PUWER Regulation 5, employers must ensure that all storage racking—whether holding heavy aerospace spares at Winterstoke Commercial Park, injection moulding dies on Oldmixon Crescent Industrial Estate, or medical records at Weston General Hospital—is maintained in an efficient state, in efficient working order and in good repair. Because pallet and cantilever racking is exposed to mechanical handling collisions and heavy cyclic loading that can lead to structural deterioration, PUWER Regulation 6 requires periodic inspections at suitable intervals by a competent person, with formal written records retained. The Health and Safety Executive's guidance publication HSG76, Warehousing and Storage: A Guide to Health and Safety, defines the mandatory three-tier inspection hierarchy required to satisfy PUWER. First, warehouse operatives and forklift drivers must report any rack strike or visible structural fault immediately. Second, an appointed Person Responsible for Racking Safety (PRRS) must perform and log regular internal visual checks, normally weekly. Third, an annual expert inspection must be conducted by an independent specialist such as a SEMA Approved Racking Inspector. Failing to uphold this regime in Weston-super-Mare's aerospace, manufacturing and healthcare sectors risks HSE enforcement notices, invalidated insurance and prosecution.
Every SEMA racking inspection we perform in Weston-super-Mare delivers a rigorous, engineering-led evaluation of your storage systems, classifying every recorded observation under SEMA's traffic-light risk system. Using a one-metre straightedge against impacted upright columns and frame bracing, our SARI-qualified engineer measures whether deflections fall within SEMA's maximum permissible tolerances of 3 millimetres in the down-aisle direction, 5 millimetres in the cross-aisle plane and 10 millimetres on horizontal or diagonal bracing struts. Components within these limits are graded Green, confirming the bay remains safe for full rated loading while being documented for monitoring at the next annual cycle. Where structural distortion exceeds those thresholds, or where essential components such as beam safety locks or floor anchor bolts are missing without creating an immediate collapse hazard, the defect is classified as Amber; under SEMA protocols, Amber bays must be unloaded within four weeks so certified manufacturer replacement parts can be installed, and any Amber defect remaining loaded beyond twenty-eight days automatically escalates to a Red hazard. Severe damage—including deflections exceeding twice the SEMA tolerance, torn steel uprights or damaged beam connectors—is classified as Red, requiring immediate offloading and physical isolation of the bay. Our comprehensive written report includes bay-by-bay defect locations, load notice audits and compliance guidance referencing https://www.rackstor.co.uk/sema-racking-inspection-checklist.
Call Rack Safety Inspections on 0800 654 6955 to arrange a certified SEMA racking inspection in Weston-super-Mare or anywhere in the South West.
Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.