Pallet Racking Inspection Bridlington

Bridlington supports seafood processing plastics extrusion and localized manufacturing requiring SEMA safety compliance. Rackstor's inspectors are SARI accredited, and in Bridlington we report on uprights, beams, bracing, baseplates, locks and load notices as a matter of course.

Bridlington's Storage and Distribution Network

Our visits in Bridlington take in Bessingby Industrial Estate and Carnaby Industrial Estate and the rest of the town's commercial premises. The report we produce for Bridlington sites records the inspector's SARI number and signature, giving you a clear, dated record of the inspection.

What We Focus On in Bridlington

Based on the work carried out in Bridlington, these are the points our inspectors check most closely.

• Cold-chain and chilled storage is checked closely for corrosion and condensate damage to uprights, baseplates and beam connectors.
• In high-volume operations the lower levels and aisle-end frames take most of the knocks, so we check frame protectors, column guards and beam connectors at every run end.
• Raw material, component and work-in-progress storage is prone to overloading and to beams being moved without the load rating being rechecked — both are recorded if found.
• Column guards and run-end barriers are inspected, and gaps in protection are recorded alongside the damage they allow.

Your Legal Duty in Bridlington

For Bridlington businesses, the legal position is the same as anywhere in the UK: PUWER 1998 places the duty on the employer, HSG76 sets the expectation of an annual expert inspection, and BS EN 15635 defines the damage tolerances used to classify each defect. Between expert visits, a trained Person Responsible for Racking Safety should carry out regular checks at your Bridlington site.

See our SEMA racking inspection checklist for the measured tolerances, or read what the HSE expects.