Pallet Racking Inspection Cambridge
Pallet racking in Cambridge carries the stock of businesses working in high-tech R&D and biotech and pharmaceutical cold-chain logistics. Rackstor Safety Inspections provides SEMA-aligned racking inspections across the city, carried out by SARI accredited inspectors and reported in writing so you can show your racking is being managed.
Racking Sites Across Cambridge
Much of Cambridge's racking sits within Cambridge Science Park, Cambridge Biomedical Campus and St John's Innovation Park. These are linked by the M11 J11–J13, A14, A10 and A11, which also carry our inspectors to sites elsewhere in the city.
What We Focus On in Cambridge
Typical Cambridge customers work in high-tech R&D and biotech and pharmaceutical cold-chain logistics.
- Chilled and frozen stores get particular attention at floor level, where condensate collects around baseplates and anchor bolts.
- Busy pick faces and fast pallet turnover put the front uprights of every run at risk from truck strikes; we measure each dent and bow against the tolerance rather than estimating it.
- Sensitive and high-value products make any racking failure costly, so our report gives a prioritised repair list the site can act on straight away.
Book a SEMA-aligned inspection in Cambridge
Written report within 48 hours of the visit.
Your Legal Duty in Cambridge
Racking counts as work equipment under PUWER 1998. HSE guidance HSG76 and BS EN 15635 expect weekly in-house checks by a Person Responsible for Racking Safety plus at least an annual expert inspection — the part our SARI accredited inspectors deliver in Cambridge.
See our SEMA racking inspection checklist for the measured tolerances, or read what the HSE expects.
Nearby Towns
Sites in Waterbeach, Ely, St Neots, Royston and Haverhill are covered on the same basis as Cambridge itself.
- Waterbeach
- Ely
- St Neots
- Royston
- Haverhill