For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.
Positioned along the strategic A1(M) and A19 manufacturing spine of the North East, County Durham is a major centre for rail engineering, earthmoving machinery production and high-volume logistics. Industrial storage facilities are heavily concentrated within Aycliffe Business Park Newton Aycliffe, Peterlee Industrial Estate Peterlee, Bowburn Industrial Estate Durham, Heighington Lane Business Park Newton Aycliffe and Tanfield Lea Industrial Estate Stanley. Multi-modal freight and HGV fleets access these parks via A1(M) Junction 59 Newton Aycliffe interchange, A1(M) Junction 61 Bowburn and Durham South interchange, A1(M) Junction 62 Carrville and Durham East interchange, the A19 Peterlee interchange with the B1320, and the A688 Thinford roundabout junction with the A167 Spennymoor. County Durham's industrial landscape is anchored by rolling stock assembly, passenger train manufacturing and railway bogie fabrication at Hitachi Rail Newton Aycliffe, alongside Caterpillar earthmoving equipment component fabrication and assembly at Peterlee. Surrounding estates drive automotive sub-assembly, vehicle stamping and component pressing for regional supply chains, plastic bottle blow-moulding, thermoforming and polymer packaging manufacturing, and commercial white goods manufacturing, consumer electronics distribution and central returns handling. These major employment sites serve surrounding towns including Durham, Newton Aycliffe, Peterlee, Bishop Auckland, Chester-le-Street, Consett, Stanley, Seaham and Spennymoor. Storing heavy steel bogie castings, automotive press dies and high-bay palletised polymers places extreme point loads on adjustable pallet racking, heavy-duty shelving and cantilever arms. In busy component stores where reach trucks and counterbalance forklifts work tight shift patterns, minor leg strikes and beam deflections quickly accumulate, making independent SEMA racking inspections vital across County Durham.
For manufacturing and logistics duty holders across County Durham, adhering to the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 warehousing guidance is essential to workplace safety. PUWER Regulation 5 places an absolute duty on employers to maintain work equipment—including all pallet racking, cantilever frames and mezzanine storage systems—in an efficient state, in efficient working order and in good repair. Because warehouse racking is continuously subjected to dynamic forklift loading and potential mechanical impact, PUWER Regulation 6 requires formal inspections at regular intervals by a competent person, with results recorded and kept available for HSE scrutiny. HSG76 defines best practice through a three-tier inspection hierarchy. The first tier relies on warehouse operatives and MHE drivers reporting any collision or structural defect immediately. The second tier mandates regular weekly or monthly documented inspections by an appointed Person Responsible for Racking Safety. The third tier requires an annual technical audit carried out by a qualified external specialist such as a SEMA Approved Rack Inspector. In high-load engineering environments like Aycliffe Business Park or Peterlee Industrial Estate, ignoring PUWER Regulations 5 and 6 risks HSE enforcement action, invalidated employer liability cover, costly production stoppages and potentially fatal structural collapse.
A professional racking audit from our SEMA Approved Rack Inspectors equips County Durham facilities with a clear, actionable record of structural health based on SEMA's Red, Amber and Green grading criteria. When inspecting high-bay pallet racks or heavy engineering stores, our inspectors check every frame, beam, connector and anchor bolt against SEMA codes of practice. If a frame upright exhibits severe deformation—exceeding 10 millimetres of twist or critical buckling beyond the 3 millimetre down-aisle and 5 millimetre cross-aisle one-metre gauge rules—or if a beam shows permanent plastic deformation, it is designated a Red risk. Red risk locations must be offloaded immediately and isolated from use until repaired with compatible manufacturer parts. Damage that exceeds permissible tolerances without creating an immediate danger of collapse is graded Amber; under the SEMA damage-only offloading method, once an Amber position is unloaded it must remain empty until repaired, and any loaded Amber bay must be rectified within four weeks or be upgraded to Red. Slight marks and deflections within SEMA tolerances are recorded as Green for ongoing monitoring. Each written report includes full bay schematics, load notice verification and beam clip audits, and warehouse teams can consult https://www.rackstor.co.uk/sema-racking-inspection-checklist to strengthen their weekly internal inspections.
Book your SEMA-approved racking inspection across County Durham in the North East by calling Rack Safety Inspections on 0800 654 6955.
Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.