SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection County Londonderry

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
County Londonderry

Anchoring the North West economy from the shores of Lough Foyle to the Bann Valley and Lough Neagh, County Londonderry hosts world-leading nanotechnology, chemical synthesis, timber processing and deepwater port logistics. Major warehousing and industrial operations thrive within Maydown Industrial Estate Derry, Springtown Industrial Estate Derry, Campsie Industrial Estate Eglinton Derry, Pennyburn Industrial Estate Derry and Ballyronan Road Industrial Estate Magherafelt. Freight movements across the county rely on the A6 Dungiven bypass junction with the B132, the A2 Caw Roundabout Foyle Bridge eastern approach Derry, the A515 Madam's Bank Road junction with Culmore Road Derry, the A6 Castledawson Roundabout junction with the A31 Magherafelt bypass, and the A2 Clooney Road junction with City of Derry Airport Eglinton. County Londonderry's industrial profile includes hard disk drive thin-film magnetic recording head manufacturing at Seagate Technology Derry, deepwater commercial port stevedoring, coal import discharge and oil fuel storage at Foyle Port Lisahally, and DuPont Nomex and Kevlar aramid fibre chemical synthesis and elastomer production at Maydown. Inland hubs drive precast concrete beam manufacturing, structural lintels and civil drainage pipe extrusion alongside commercial sawmilling, kiln timber treatment, timber-frame kit fabrication and pallet storage. This network connects Derry, Coleraine, Magherafelt, Limavady, Dungiven, Maghera, Castledawson, Portstewart and Eglinton. Racking systems across County Londonderry face intense structural demands, from heavy cantilevered timber and precast building products in Magherafelt to hazardous chemical drum storage at Maydown and precision cleanroom component racking at Springtown. Independent SEMA racking inspections are essential to detect frame distortion, chemical or coastal corrosion and overloaded beams before failures occur.

Duty holders operating storage equipment across County Londonderry must comply with the Provision and Use of Work Equipment Regulations 1998 (enforced locally under PUWER Northern Ireland 1999) and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Regulation 5 of PUWER requires every employer to ensure that work equipment, including pallet racking, cantilever racking and drive-in storage systems, is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 mandates that where racking is exposed to conditions causing deterioration liable to create a dangerous situation—such as continuous MHE movement or heavy industrial loading—it must be inspected at suitable intervals by a competent person, with formal records maintained. HSG76 sets out a clear three-tier inspection hierarchy to achieve compliance. First, warehouse staff and forklift drivers must report any rack collision or structural fault immediately. Second, a nominated Person Responsible for Racking Safety must conduct and record weekly or monthly visual checks based on a site-specific risk assessment. Third, an external SEMA Approved Rack Inspector must carry out an expert annual inspection. In high-hazard chemical stores at Maydown Industrial Estate, port warehouses at Lisahally or busy timber and engineering depots in Magherafelt and Springtown, failing to follow this regime can lead to HSENI enforcement action, invalidated insurance and severe workplace injury.

Our SEMA Approved Rack Inspectors assess every warehouse in County Londonderry against SEMA's rigorous engineering standards, categorising findings into Red, Amber and Green risk levels for clear remediation planning. During our physical inspection, we check upright verticality, frame bracing, beam deflection and floor fixings. If an upright exceeds the maximum allowable deflection over a one-metre gauge—3 millimetres in the plane of the beams, 5 millimetres in the plane of the frame bracing, or 10 millimetres of twist—to a degree that threatens structural stability, or if critical components are severed, we assign a Red risk rating. Red bays must be immediately unloaded and isolated from warehouse operations until repaired using approved manufacturer components. Where damage exceeds SEMA tolerances without posing an immediate collapse threat under static load, it is classified as an Amber risk; once an Amber bay is unloaded it must not be reloaded until repaired, and any loaded Amber bay must be rectified within four weeks before automatically escalating to Red. Minor blemishes within SEMA tolerances are recorded as Green risks and monitored on future visits. Our detailed written report provides bay-by-bay defect mapping, load sign checks and practical recommendations, supported by our free checklist at https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety audits.

Arrange your independent SEMA racking inspection in County Londonderry, Northern Ireland by calling Rack Safety Inspections on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide