For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.
Recognised globally as a powerhouse of mobile crushing and screening machinery engineering alongside large-scale meat processing and precast concrete production, County Tyrone relies on heavy-duty industrial warehousing. Major storage and manufacturing facilities operate across Granville Industrial Estate Dungannon, Derryloran Industrial Estate Cookstown, Doogary Industrial Estate Omagh, Strabane Business Park Strabane and Dungannon Enterprise Centre Business Park Dungannon. Heavy freight and engineering haulage move through M1 Junction 15 Stangmore Roundabout Dungannon, the A5 Omagh bypass junction with the A505 Cookstown Road, the A29 Cookstown bypass approach junction with the A505, the A5 Strabane bypass roundabout junction with the A38 Lifford Road, and the A4 Ballygawley Roundabout junction with the A5. County Tyrone's industrial economy is anchored by heavy mobile crushing and screening equipment engineering at Powerscreen and Terex Dungannon, as well as commercial pork processing, bacon curing and cooked meat packaging at Karro Cookstown. Across the county, businesses also specialise in agricultural slurry management machinery, tank fabrication and pump manufacturing, precast concrete beam manufacturing, structural lintels and civil groundworks production, and commercial sand, gravel and crushed aggregate quarrying and distribution. This manufacturing network links Dungannon, Omagh, Cookstown, Strabane, Coalisland, Castlederg, Fintona, Moy and Ballygawley. Storage racking in County Tyrone endures exceptionally harsh conditions: heavy steel fabrications, hydraulic rams and quarry crusher spares stored at Granville and Derryloran impose massive point loads on pallet beams and cantilever arms, while chilled pork curing chambers in Cookstown expose racking steel to moisture, curing salts and constant reach-truck traffic. Annual inspections by a SEMA Approved Rack Inspector are vital to prevent structural failure.
Warehouse operators and manufacturers across County Tyrone have strict statutory responsibilities under the Provision and Use of Work Equipment Regulations 1998 (and the Northern Ireland PUWER 1999 legislation enforced by HSENI) as well as the HSE's HSG76 guidance on warehousing and storage. Regulation 5 of PUWER requires employers to ensure that all storage racking is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 stipulates that where racking is exposed to conditions causing deterioration liable to result in dangerous situations—such as heavy engineering parts handling or intensive cold-store forklift operations—it must be inspected at suitable intervals by a competent person and after any exceptional event. HSG76 translates this into a mandatory three-tier inspection hierarchy. First, forklift operators and shop-floor staff must report any rack strike or visibly damaged beam immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual inspections tailored to site risk levels. Third, an independent SEMA Approved Rack Inspector must perform a comprehensive annual structural audit. Whether managing heavy machinery parts stores in Dungannon and Omagh or high-bay chilled meat warehouses in Cookstown and Strabane, non-compliance risks HSENI prohibition notices, voided corporate insurance and catastrophic rack collapse.
When our SEMA Approved Rack Inspectors inspect storage installations across County Tyrone, we apply SEMA's formal Red, Amber and Green traffic-light grading system to provide clear engineering direction. Every upright, diagonal brace, beam connector, locking pin and floor anchor is systematically checked. If a heavy counterbalance truck strike leaves an upright deformed beyond SEMA tolerances—where normal limits over a one-metre section are 3 millimetres down-aisle, 5 millimetres cross-aisle and 10 millimetres of twist—to a point where structural capacity is critically reduced, or if a beam is overloaded and permanently bowed beyond 1/180th of its span, the bay is graded as a Red risk. Red risk bays must be unloaded immediately and physically cordoned off until repaired. Where damage exceeds SEMA tolerances but does not pose an immediate collapse hazard under current static loads, an Amber risk is issued; once an Amber location is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red. Minor cosmetic scuffs within allowable tolerances are graded Green and monitored at future inspections. Our full written report includes schematic location charts, load notice verification and assembly checks, alongside ongoing support via https://www.rackstor.co.uk/sema-racking-inspection-checklist for your PRRS.
To book an expert SEMA-approved racking inspection in County Tyrone, Northern Ireland, call Rack Safety Inspections today on 0800 654 6955.
Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.