SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection DIRFT, Daventry

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
DIRFT, Daventry · Northamptonshire

Recognised as the UK's premier rail-connected national distribution super-hub, DIRFT, Daventry sits at the heart of the Golden Triangle where the M1, M6 and A14 corridors converge with the West Coast Main Line. Mega-scale fulfilment centres and intermodal freight hubs operate across Prologis RFI DIRFT, Royal Mail National Distribution Centre (DIRFT), Malcolm Rail Freight Terminal (DIRFT), Tesco Daventry Distribution Centre (DIRFT) and Sainsbury's Daventry Distribution Centre (DIRFT). Heavy goods vehicle fleets and intermodal container transfers flow continuously via M1 Junction 18 (Crick), the A5 Watling Street, the A428 Rugby Road, the A361 Kilsby Road and M6 Junction 1 (Rugby). The estate's commercial profile is defined by strategic national logistics, automated warehousing and supply chain hubs at Prologis RFI DIRFT, alongside national postal sorting, parcel logistics and fleet routing records at the Royal Mail National Distribution Centre. Intermodal rail freight handling, container manifests and haulage operate round the clock at Malcolm Rail Freight Terminal, while Tesco and Sainsbury's drive national supermarket grocery distribution and cold-chain logistics alongside high-volume retail replenishment and Midlands freight operations. DIRFT links directly with surrounding towns including Daventry, Crick, Rugby, Lutterworth, Northampton, Long Buckby, Weedon Bec and Market Harborough. Racking systems inside DIRFT's giant sheds operate at maximum structural capacity: 16-metre-high narrow-aisle adjustable pallet racking, automated crane aisles, push-back blocks and sub-zero grocery chambers handle tens of thousands of pallet movements daily. Constant VNA turret truck, reach-truck and double-handler forklift operations create severe risks of lower leg impact, guide-rail distortion and beam overloading, making annual SEMA racking inspections indispensable at DIRFT, Daventry.

For national supermarket chains, postal hubs and 3PL duty holders operating at DIRFT, Daventry, strict compliance with the Provision and Use of Work Equipment Regulations 1998 and HSE guidance document HSG76 is a paramount statutory obligation. Under PUWER Regulation 5, employers must ensure that all work equipment—including high-bay adjustable pallet racking, drive-in blocks, push-back racking and automated storage structures—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a major MHE impact, with formal records retained. HSG76 establishes a three-tier inspection hierarchy to manage this duty. First, warehouse operatives and forklift drivers must report any rack collision or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual inspections tailored to 24/7 site throughput. Third, an independent SEMA Approved Rack Inspector must perform a comprehensive annual structural audit. At DIRFT's high-consequence national grocery and parcel distribution hubs, failing to uphold PUWER and HSG76 risks HSE prohibition notices, voided corporate insurance, national supply chain bottlenecks and catastrophic progressive rack collapse.

When our SEMA Approved Rack Inspectors audit mega-distribution facilities at DIRFT, Daventry, every defect is classified under SEMA's Red, Amber and Green traffic-light framework to give engineering and safety teams clear remediation rules. We inspect every accessible upright, bracing diagonal, load beam, locking pin and floor anchor against SEMA engineering tolerances. Over a one-metre gauge length, upright deformations must not exceed 3 millimetres down-aisle, 5 millimetres cross-aisle or 10 millimetres of twist, while beam deflection under load must not surpass 1/180th of the clear span. Where severe forklift impact, sheared baseplates or buckled struts create an immediate danger of failure, we issue a Red risk notice; the bay must be offloaded immediately and physically cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without presenting an immediate collapse hazard under current static loads, an Amber risk rating is applied. Under SEMA rules, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor scuffs within allowable limits are recorded as Green risks for future monitoring. Our detailed written report includes aisle-by-aisle defect mapping, SWL notice verification and floor fixing checks, supported by https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal PRRS audits.

To book an independent SEMA-approved racking inspection at DIRFT, Daventry in the East Midlands, call Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide