For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.
Stretching from the aerospace and marine engineering clusters of Poole, Bournemouth and Christchurch to the defence technology hubs of Dorchester and Weymouth, Dorset supports an advanced manufacturing, quarrying and maritime supply chain economy. Major industrial warehousing and technical storage facilities operate across Ferndown Industrial Estate Wimborne, Tower Park Industrial Estate Poole, Granby Industrial Estate Weymouth, Winfrith New Technology Park Dorchester and Aviation Park West Bournemouth Airport Christchurch. Freight and regional distribution vehicles connect across the county via the A31 Ameysford roundabout Ferndown interchange, the A35 Bakers Arms roundabout Poole west approach, the A354 Weymouth Relief Road roundabout at Jurassica Way, the A338 Bournemouth Spur Road junction with the B3073 Hurn Airport approach, and the A35 Dorchester bypass junction with the A37 Monkeys Jump roundabout. Dorset's industrial landscape is anchored by luxury motor yacht design, hull laminating and bespoke marine craftsmanship at Sunseeker Poole, alongside aerospace air-to-air refuelling systems, avionics and airframe sub-assemblies at Cobham Wimborne. Across the wider county, key sectors include onshore crude oil extraction, gathering station processing and rail pipeline discharge at Wytch Farm, Portland freestone quarrying, dimension stone masonry and restoration aggregate cutting, and subsea acoustic transducers, oceanographic sonar arrays and defence maritime hydrophones. These commercial estates connect Poole, Bournemouth, Christchurch, Wimborne Minster, Ferndown, Weymouth, Dorchester, Bridport, Blandford Forum and Shaftesbury. Racking systems across Dorset face demanding conditions, from heavy marine mouldings, timber and aerospace extrusions stored on cantilever racking in Poole and Ferndown to saline coastal corrosion at Weymouth, making annual SEMA racking inspections essential.
All warehouse duty holders, aerospace and marine manufacturers and logistics operators across Dorset must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including adjustable pallet racking, heavy-duty cantilever racks, drive-in blocks and mezzanine shelving—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. In Dorset's high-value aerospace facilities at Ferndown and Bournemouth Airport or marine engineering stores in Poole and Weymouth, failing to uphold PUWER and HSG76 risks HSE enforcement notices, invalidated insurance and catastrophic rack failure.
Our SEMA Approved Rack Inspectors provide Dorset businesses with a rigorous, independent structural audit graded under SEMA's Red, Amber and Green risk classification system. During our physical inspection, we assess upright verticality, frame bracing, beam deflection, connector engagement and floor fixings against SEMA codes of practice. Over a one-metre gauge length, upright deformations exceeding 3 millimetres in the down-aisle direction, 5 millimetres in the cross-aisle direction or 10 millimetres of twist violate permissible tolerances, while loaded beams must not deflect beyond 1/180th of their clear span. When severe impact damage, sheared baseplate anchors or critically buckled struts create an immediate danger of structural failure, we issue a Red risk notice; the affected bay must be offloaded immediately and cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without threatening instant collapse under current static loads, an Amber risk rating is applied. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic scuffs within allowable limits are recorded as Green risks for ongoing monitoring. Our detailed written report provides bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, supported by https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.
To schedule a SEMA-approved racking inspection anywhere in Dorset, South West, call Rack Safety Inspections today on 0800 654 6955.
Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.