For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.
Commanding the northern shore of the Firth of Tay along the strategic A90 coastal corridor, Dundee is a dynamic Scottish centre for biomedical research, precision electronics, light manufacturing and regional distribution. Major industrial warehousing and institutional archive facilities operate across Ninewells Hospital (NHS Tayside), University of Dundee Nethergate Campus, Dundee City Council Dundee House North Lindsay Street, Wester Gourdie Industrial Estate and Dryburgh Industrial Estate. Freight and regional distribution vehicles navigate the city via the A90 Kingsway dual carriageway, the A92 Tay Road Bridge approach, the A85 Riverside Drive, the A923 Coupar Angus Road and the A929 Forfar Road. Dundee's commercial and institutional landscape encompasses light manufacturing, electronics and spare parts supply across Wester Gourdie Industrial Estate and Dryburgh Industrial Estate, alongside biomedical and drug discovery research documentation and interactive digital media and software physical assets. Major public and academic repositories manage NHS acute patient records and clinical case histories at Ninewells Hospital as well as higher education archive collections and museum storage at the University of Dundee. These commercial and institutional hubs connect directly with surrounding towns including Broughty Ferry, Monifieth, Carnoustie, Arbroath, Forfar, Blairgowrie,Newport-on-Tay, Tayport and Cupar. Storage racking across Dundee faces varied mechanical demands: high-bay distribution warehouses and electronics assembly plants on Wester Gourdie and Dryburgh Industrial Estates operate narrow-aisle adjustable pallet racking and small-parts picking structures under continuous reach-truck and order-picker shifts, while clinical and academic repositories at Ninewells and Nethergate support dense archival shelving. Annual inspections by a SEMA Approved Rack Inspector are essential across Dundee to prevent structural fatigue.
All warehouse duty holders, electronics and manufacturing directors and public sector facilities managers in Dundee must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including adjustable pallet racking, cantilever racking, multi-tier shelving and mobile archive systems—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. In Dundee's busy industrial hubs at Wester Gourdie and Dryburgh or clinical archives at Ninewells Hospital, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.
Our SEMA Approved Rack Inspectors provide Dundee businesses with a rigorous, independent structural audit graded under SEMA's Red, Amber and Green risk classification system. During our physical inspection, we assess upright verticality, frame bracing, beam deflection, connector engagement and floor fixings against SEMA codes of practice. Over a one-metre gauge length, upright deformations exceeding 3 millimetres in the down-aisle direction, 5 millimetres in the cross-aisle direction or 10 millimetres of twist violate permissible tolerances, while loaded beams must not deflect beyond 1/180th of their clear span. When severe impact damage, sheared baseplate anchors or critically buckled struts create an immediate danger of structural failure, we issue a Red risk notice; the affected bay must be offloaded immediately and cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without threatening instant collapse under current static loads, an Amber risk rating is applied. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic scuffs within allowable limits are recorded as Green risks for ongoing monitoring. Our detailed written report provides bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, supported by https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.
To arrange a SEMA-approved racking inspection in Dundee, Scotland, call Rack Safety Inspections today on 0800 654 6955.
Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.