For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.
Commanding the A1(M) corridor at the administrative and academic heart of County Durham, Durham supports a major concentration of regional trade distribution, light manufacturing, healthcare records management and university archival storage. Industrial warehousing and public sector repositories operate across University Hospital of North Durham, County Hall (Durham County Council, Aykley Heads), Durham University (Palatine Centre), Belmont Industrial Estate and Dragonville Industrial Estate. Freight and regional distribution vehicles connect directly via A1(M) Junction 62 (Carrville), the A167 Darlington Road, the A690 Neville's Cross, the A177 Stockton Road and the A691 Framwellgate Peth. Durham's commercial landscape is powered by light manufacturing, logistics and A1(M) corridor warehousing at Belmont Industrial Estate, alongside commercial trade counters, automotive services and regional distribution across Dragonville Industrial Estate. In the public and academic sectors, major repositories manage County Durham and Darlington NHS Foundation Trust acute medical archives at University Hospital of North Durham, unitary county council administration, planning and public records at County Hall Aykley Heads, and higher education research, academic archives and student administration at Durham University. These commercial and institutional hubs serve surrounding towns including Chester-le-Street, Spennymoor, Bishop Auckland, Peterlee, Seaham, Houghton-le-Spring, Consett and Stanley. Storage racking across Durham faces diverse operational challenges: A1(M) distribution hubs and builders' merchants at Belmont and Dragonville operate high-bay adjustable pallet racking and external timber or steel cantilever racks under intensive reach-truck and counterbalance forklift shifts, while high-density archive shelving at Aykley Heads and University Hospital of North Durham carries heavy static paper loads. Annual inspections by a SEMA Approved Rack Inspector are essential across Durham.
All warehouse duty holders, trade distribution managers and public or academic archive leads in Durham must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including adjustable pallet racking, cantilever racking, multi-tier shelving and mobile archive systems—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. In Durham's busy logistics warehouses at Belmont Industrial Estate or trade depots at Dragonville, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.
Our SEMA Approved Rack Inspectors provide Durham businesses with a rigorous, independent structural audit graded under SEMA's Red, Amber and Green risk classification system. During our physical inspection, we assess upright verticality, frame bracing, beam deflection, connector engagement and floor fixings against SEMA codes of practice. Over a one-metre gauge length, upright deformations exceeding 3 millimetres in the down-aisle direction, 5 millimetres in the cross-aisle direction or 10 millimetres of twist violate permissible tolerances, while loaded beams must not deflect beyond 1/180th of their clear span. When severe impact damage, sheared baseplate anchors or critically buckled struts create an immediate danger of structural failure, we issue a Red risk notice; the affected bay must be offloaded immediately and cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without threatening instant collapse under current static loads, an Amber risk rating is applied. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic scuffs within allowable limits are recorded as Green risks for ongoing monitoring. Our detailed written report provides bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, supported by https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.
To arrange a SEMA-approved racking inspection in Durham, North East, call Rack Safety Inspections today on 0800 654 6955.
Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.