SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection East Sussex

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
East Sussex

Spanning the Channel coast from Newhaven Port and Eastbourne to Hastings and the inland commercial towns of Lewes, Uckfield and Hailsham, East Sussex supports a high-value economy of vacuum pump engineering, cross-channel freight logistics, subsea connector manufacturing, timber engineering and bonded wine storage. Major industrial warehousing and manufacturing facilities operate across Castleham Industrial Estate St Leonards-on-Sea Hastings, Bellbrook Industrial Estate Uckfield, Diplocks Industrial Estate Hailsham, Newhaven Port Industrial Area Newhaven and Courtlands Industrial Estate Eastbourne. Freight and regional distribution vehicles connect across the county via the A27 Southerham roundabout Lewes junction with the A26, the A22 Golden Cross roundabout Hailsham approach, the A21 Hastings bypass junction with the A2100 Battle Road, the A26 Beddingham roundabout junction with the A27, and the A259 Newhaven Harbour approach junction with Drove Road. East Sussex's industrial landscape is anchored by cross-channel roll-on/roll-off freight shipping, scrap metal bulk handling and port operations at Newhaven, alongside high-vacuum turbomolecular pump assembly, semiconductor exhaust management and instrumentation at Edwards Eastbourne. Across the county, businesses also specialise in precision marine subsea electrical connectors, penetrators and defence wiring harnesses, commercial viticulture, estate wine pressing, temperature-controlled fermentation and bonded storage, and engineered timber roof truss manufacturing, architectural joinery and custom building supplies. These estates link Eastbourne, Hastings, Lewes, Newhaven, Uckfield, Hailsham, Bexhill-on-Sea, Crowborough, Seaford and Battle. From coastal salt air corrosion in Newhaven port stores to heavy timber cantilever racks in Hailsham and Uckfield and precision component racking in Eastbourne and Hastings, annual SEMA racking inspections are essential.

All warehouse duty holders, precision engineering directors, port operators and timber merchants across East Sussex must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including adjustable pallet racking, heavy-duty timber cantilever racks, bonded wine storage racking and mezzanine shelving—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. Across East Sussex's high-tech manufacturing plants at Courtlands and Castleham or port and trade depots in Newhaven, Uckfield and Hailsham, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.

Our SEMA Approved Rack Inspectors provide East Sussex businesses with a rigorous, independent structural audit graded under SEMA's Red, Amber and Green risk classification system. During our physical inspection, we assess upright verticality, frame bracing, beam deflection, connector engagement and floor fixings against SEMA codes of practice. Over a one-metre gauge length, upright deformations exceeding 3 millimetres in the down-aisle direction, 5 millimetres in the cross-aisle direction or 10 millimetres of twist violate permissible tolerances, while loaded beams must not deflect beyond 1/180th of their clear span. When severe impact damage, sheared baseplate anchors or critically buckled struts create an immediate danger of structural failure, we issue a Red risk notice; the affected bay must be offloaded immediately and cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without threatening instant collapse under current static loads, an Amber risk rating is applied. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic scuffs within allowable limits are recorded as Green risks for ongoing monitoring. Our detailed written report provides bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, supported by https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.

To schedule a SEMA-approved racking inspection anywhere in East Sussex, South East, call Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide