For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.
Positioned on the Surrey-Greater London border just north of M25 Junction 9 along the A24 corridor, Epsom supports a thriving mix of trade warehousing, motorsport engineering design, commercial publishing, equine veterinary archiving and acute NHS healthcare administration. Major industrial storage and public sector archive facilities operate across Epsom Hospital (Epsom and St Helier University Hospitals NHS Trust) Dorking Road, Epsom and Ewell Borough Council Town Hall The Parade, Longmead Industrial Estate, Epsom Business Park Kiln Lane and Nonsuch Business Park. Regional delivery fleets and trade suppliers connect via M25 Junction 9 Leatherhead via the A24, the A24 Dorking Road corridor, the A240 Kingston Road, the B284 Hook Road and the A2022 College Road. Epsom's commercial economy is powered by motor racing engineering design and precision component spares, alongside commercial publishing, accountancy files and corporate administrative storage across Longmead Industrial Estate, Epsom Business Park Kiln Lane and Nonsuch Business Park. In the public and heritage sectors, major repositories manage equine racing heritage, stud book pedigree records and veterinary archives, NHS acute hospital clinical files, cardiology records and surgical notes at Epsom Hospital, and borough council statutory planning, green belt conservation and deeds at The Parade. These commercial estates serve surrounding towns including Ewell, Leatherhead, Ashtead, Banstead, Sutton, Chessington, Tolworth and Kingston upon Thames. Storage racking across Epsom faces high-density urban pressures: trade units and engineering workshops at Longmead and Kiln Lane maximise compact floor plates with narrow-aisle adjustable pallet racking and cantilever frames where frequent forklift turns cause lower upright leg impacts, making annual SEMA racking inspections essential.
All warehouse duty holders, trade merchants, engineering directors and public sector facilities managers in Epsom must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including adjustable pallet racking, cantilever racking, multi-tier shelving and mobile archive systems—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. In Epsom's busy commercial units at Longmead Industrial Estate and Nonsuch Business Park or clinical archives at Epsom Hospital, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.
Our SEMA Approved Rack Inspectors provide Epsom businesses with a rigorous, independent structural audit graded under SEMA's Red, Amber and Green risk classification system. During our physical inspection, we assess upright verticality, frame bracing, beam deflection, connector engagement and floor fixings against SEMA codes of practice. Over a one-metre gauge length, upright deformations exceeding 3 millimetres in the down-aisle direction, 5 millimetres in the cross-aisle direction or 10 millimetres of twist violate permissible tolerances, while loaded beams must not deflect beyond 1/180th of their clear span. When severe impact damage, sheared baseplate anchors or critically buckled struts create an immediate danger of structural failure, we issue a Red risk notice; the affected bay must be offloaded immediately and cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without threatening instant collapse under current static loads, an Amber risk rating is applied. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic scuffs within allowable limits are recorded as Green risks for ongoing monitoring. Our detailed written report provides bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, supported by https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.
To arrange a SEMA-approved racking inspection in Epsom, South East, call Rack Safety Inspections today on 0800 654 6955.
Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.