For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.
Situated in the fertile Vale of Evesham along the strategic A46 and A44 trunk corridors between the M5 and M40 motorways, Evesham is one of the UK's premier centres for fresh produce packing, horticultural cold-chain logistics, food processing and light engineering. Major industrial warehousing and public sector archive facilities operate across Evesham Community Hospital, Civic Centre (Wychavon District Council, Pershore), Vale Park (Crab Apple Way), Four Pools Industrial Estate and Davies Road Industrial Estate. Refrigerated HGV fleets and regional trade vehicles navigate the town via the A46 Evesham Bypass, the A44 Worcester Road, the A4184 Abbey Road, the B4035 Badsey Road and the B4084 Pershore Road. Evesham's commercial economy is powered by fresh produce packing, horticulture logistics and food processing at Vale Park (Crab Apple Way), alongside light engineering, trade counters and Worcestershire warehousing at Four Pools Industrial Estate and commercial vehicle servicing, packaging and regional haulage across Davies Road Industrial Estate. In the public sector, local repositories manage Herefordshire and Worcestershire NHS inpatient and outpatient files at Evesham Community Hospital as well as district council administration, planning and rural heritage archives at the Wychavon Civic Centre in Pershore. These commercial estates serve surrounding towns including Pershore, Broadway, Tewkesbury, Stratford-upon-Avon, Alcester,Chipping Campden, Bidford-on-Avon and Worcester. Storage racking across Evesham faces intense seasonal and environmental demands: chilled produce packhouses at Vale Park and Four Pools operate high-density drive-in and adjustable pallet racking in humid, temperature-controlled halls under rapid reach-truck turnarounds, making annual SEMA racking inspections essential.
All warehouse duty holders, fresh produce packers, cold-chain logistics operators and public sector facilities managers in Evesham must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including adjustable pallet racking, chilled drive-in blocks, push-back systems and cantilever frames—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. In Evesham's high-turnover packhouses at Vale Park and Four Pools Industrial Estate, failing to uphold PUWER and HSG76 risks HSE enforcement notices, BRCGS audit failures, voided insurance and catastrophic rack failure.
Our SEMA Approved Rack Inspectors provide Evesham businesses with a rigorous, independent structural audit graded under SEMA's Red, Amber and Green risk classification system. During our physical inspection, we assess upright verticality, frame bracing, beam deflection, connector engagement and floor fixings against SEMA codes of practice. Over a one-metre gauge length, upright deformations exceeding 3 millimetres in the down-aisle direction, 5 millimetres in the cross-aisle direction or 10 millimetres of twist violate permissible tolerances, while loaded beams must not deflect beyond 1/180th of their clear span. When severe impact damage, sheared baseplate anchors or critically buckled struts create an immediate danger of structural failure, we issue a Red risk notice; the affected bay must be offloaded immediately and cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without threatening instant collapse under current static loads, an Amber risk rating is applied. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic scuffs within allowable limits are recorded as Green risks for ongoing monitoring. Our detailed written report provides bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, supported by https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.
To arrange a SEMA-approved racking inspection in Evesham, West Midlands, call Rack Safety Inspections today on 0800 654 6955.
Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.