For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.
Anchoring the North East Wales cross-border industrial engine along the A55, A494 and A548 corridors, Flintshire is one of the UK's premier advanced manufacturing counties, hosting global commercial aircraft wing production, hybrid engine assembly, coated steel coil processing and hygiene paper conversion. Massive industrial warehousing and manufacturing plants operate across Deeside Industrial Park Deeside, Manor Park Industrial Estate Flint, Broughton Shopping and Business Park Broughton, Greenfield Business Park Holywell and Castle Park Industrial Estate Flint. Heavy freight and engineering supply chains connect across the county via A55 Junction 36 Broughton and Airbus interchange, A55 Junction 33 Northop interchange with the A5119, the A494 Deeside Industrial Park interchange with the A548, A55 Junction 34 Ewloe interchange with the A494, and the A548 Flint coastal route junction with the B5129. Flintshire's industrial landscape is anchored by commercial aircraft wing structural assembly and composite panel manufacture at Airbus Broughton, alongside automotive engine block casting, cylinder machining and hybrid engine assembly at Toyota Deeside and galvanised automotive sheet steel coating, metallic paint application and coil slitting at Tata Steel Shotton. Across the county, businesses also drive paper tissue manufacturing, mother reel converting and hygiene paper packaging at Essity Oakenholt and aerospace chemical milling, high-tolerance CNC machining and surface protective treatment. These hubs connect Mold, Deeside, Shotton, Connah's Quay, Flint, Holywell, Buckley, Broughton, Hawarden and Ewloe. From heavy aerospace extrusion cantilever racking at Broughton to high-bay logistics warehouses at Deeside Industrial Park, annual SEMA racking inspections are essential across Flintshire.
All warehouse duty holders, aerospace and automotive tier suppliers, steel processors and paper manufacturers across Flintshire must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including high-bay adjustable pallet racking, heavy-duty cantilever racks, drive-in blocks and automated storage systems—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. Across Flintshire's high-consequence aerospace halls at Broughton, automotive plants at Deeside and industrial parks in Flint and Holywell, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.
When our SEMA Approved Rack Inspectors audit storage systems across Flintshire, every defect is classified using SEMA's formal Red, Amber and Green risk grading framework to provide clear engineering priorities. During our physical inspection, we measure upright verticality and bracing integrity over a one-metre gauge length against strict SEMA limits: maximum permissible deformations are 3 millimetres down-aisle, 5 millimetres cross-aisle and 10 millimetres of twist, while beam deflection under load must not exceed 1/180th of the clear span. Where severe mechanical impact, sheared baseplate anchors or permanently bowed beams create an immediate threat to structural stability, we issue a Red risk notice; the affected bay must be offloaded immediately and physically cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without presenting an immediate collapse hazard under current static loads, an Amber risk rating is assigned. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic marks within allowable tolerances are recorded as Green risks for monitoring during future audits. Our comprehensive written report includes bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, alongside practical guidance at https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.
To book an independent SEMA-approved racking inspection anywhere in Flintshire, Wales, call Rack Safety Inspections today on 0800 654 6955.
Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.