For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.
Spanning the M4 and A470 industrial heartland of South Wales from Pontypridd and Llantrisant to Bridgend and Port Talbot, Glamorgan commands the principality's heaviest concentration of steelmaking, sovereign coin minting, automotive powertrain engineering, structural steel fabrication and clinical trials distribution. Major industrial warehousing and manufacturing plants operate across Llantrisant Business Park Llantrisant, Treforest Industrial Estate Pontypridd, Waterton Industrial Estate Bridgend, Baglan Energy Park Port Talbot and Kenfig Industrial Estate Margam. Freight hauliers and heavy industrial supply chains move across the region via M4 Junction 35 Pencoed Bridgend East interchange, M4 Junction 38 Margam and Port Talbot South interchange, M4 Junction 34 Miskin and Llantrisant interchange, M4 Junction 41 Pentyla Port Talbot interchange, and the A470 Upper Boat interchange Treforest. Glamorgan's industrial economy is anchored by blast furnace steelmaking, continuous slab casting and hot-rolled coil rolling at Tata Steel Port Talbot, alongside official circulating coin minting, commemorative medals and precious metals bullion refining at The Royal Mint Llantrisant. Across the wider region, businesses also drive automotive transmission manufacturing, precision gear grinding and sub-assembly testing, pharmaceutical clinical trial supplies packaging, cryogenic storage and distribution logistics, and heavy structural steel frame fabrication, long-span bridge girder welding and protective blast painting. These strategic parks connect Cardiff, Swansea, Bridgend, Port Talbot, Neath, Pontypridd, Llantrisant, Caerphilly, Merthyr Tydfil and Barry. From heavy steel section cantilever racks in Margam and Treforest to high-bay pharmaceutical vaults in Llantrisant and Bridgend, annual SEMA racking inspections are essential across Glamorgan.
All warehouse duty holders, steel fabricators, automotive tier suppliers and pharmaceutical logistics directors across Glamorgan must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including high-bay adjustable pallet racking, heavy-duty steel cantilever racks, drive-in blocks and automated vault storage—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. Across Glamorgan's heavy industrial parks at Waterton, Treforest, Llantrisant and Baglan, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.
When our SEMA Approved Rack Inspectors audit storage systems across Glamorgan, every defect is classified using SEMA's formal Red, Amber and Green risk grading framework to provide clear engineering priorities. During our physical inspection, we measure upright verticality and bracing integrity over a one-metre gauge length against strict SEMA limits: maximum permissible deformations are 3 millimetres down-aisle, 5 millimetres cross-aisle and 10 millimetres of twist, while beam deflection under load must not exceed 1/180th of the clear span. Where severe mechanical impact, sheared baseplate anchors or permanently bowed beams create an immediate threat to structural stability, we issue a Red risk notice; the affected bay must be offloaded immediately and physically cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without presenting an immediate collapse hazard under current static loads, an Amber risk rating is assigned. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic marks within allowable tolerances are recorded as Green risks for monitoring during future audits. Our comprehensive written report includes bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, alongside practical guidance at https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.
To book an independent SEMA-approved racking inspection anywhere in Glamorgan, Wales, call Rack Safety Inspections today on 0800 654 6955.
Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.