SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Glasgow City

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Glasgow City

Spanning the urban industrial corridors of the Clyde Valley along the M8, M74 and M77 motorways, Glasgow City is a global centre for naval warship construction, nanosatellite assembly, high-speed Scotch whisky bottling, precision photonics and last-mile urban parcel fulfilment. Massive industrial warehousing and advanced manufacturing facilities operate across Hillington Industrial Estate Hillington Glasgow, Cambuslang Investment Park Cambuslang, Clydeside Industrial Estate Scotstoun, Queenslie Industrial Estate Glasgow and Glasgow Airport Business Park Paisley Glasgow. Freight trunking and urban delivery fleets connect across the city region via M8 Junction 26 Hillington interchange, M8 Junction 11 Stepps Queenslie interchange, M74 Junction 2A Cambuslang interchange, M8 Junction 19 Kingston Bridge Anderston interchange, and M77 Junction 1 Dumbreck interchange. Glasgow City's industrial economy is anchored by naval destroyer and frigate structural block assembly, weapons integration and testing at BAE Systems Govan and Scotstoun, alongside blended Scotch whisky processing, high-speed automated bottling and bonded warehouse distribution. Across the wider metropolitan area, businesses lead in nanosatellite constellation assembly, CubeSat avionics integration and space data payload manufacturing, last-mile urban parcel consolidation, electric van fleet sorting and rapid grocery micro-fulfilment, and industrial solid-state laser manufacturing, optical sensor assembly and precision photonics. These estates connect Glasgow, Paisley, Renfrew, Clydebank, Cambuslang, Rutherglen,Stepps, Bearsden and Giffnock. From heavy naval steel cantilever racking at Scotstoun and Govan to high-bay bonded spirit and parcel racking at Queenslie, Hillington and Cambuslang, annual SEMA racking inspections are essential across Glasgow City.

All warehouse duty holders, naval shipyard directors, bonded bottling managers, photonics manufacturers and urban logistics operators across Glasgow City must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including high-bay adjustable pallet racking, heavy-duty cantilever racks, drive-in blocks and automated storage structures—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. Across Glasgow City's industrial parks at Queenslie, Hillington, Scotstoun and Cambuslang, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.

When our SEMA Approved Rack Inspectors audit storage systems across Glasgow City, every defect is classified using SEMA's formal Red, Amber and Green risk grading framework to provide clear engineering priorities. During our physical inspection, we measure upright verticality and bracing integrity over a one-metre gauge length against strict SEMA limits: maximum permissible deformations are 3 millimetres down-aisle, 5 millimetres cross-aisle and 10 millimetres of twist, while beam deflection under load must not exceed 1/180th of the clear span. Where severe mechanical impact, sheared baseplate anchors or permanently bowed beams create an immediate threat to structural stability, we issue a Red risk notice; the affected bay must be offloaded immediately and physically cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without presenting an immediate collapse hazard under current static loads, an Amber risk rating is assigned. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic marks within allowable tolerances are recorded as Green risks for monitoring during future audits. Our comprehensive written report includes bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, alongside practical guidance at https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.

To book an independent SEMA-approved racking inspection anywhere in Glasgow City, Scotland, call Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide