SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Gloucestershire

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Gloucestershire

Spanning the M5 motorway corridor between Tewkesbury, Cheltenham, Gloucester and Stroud, together with the Forest of Dean and the Cotswolds, Gloucestershire is a powerhouse of aerospace landing gear and superalloy turbine production, cybersecurity hardware integration, steam boiler engineering and sub-zero dairy cold-chain logistics. Major industrial warehousing and advanced manufacturing facilities operate across Gloucester Business Park Brockworth, Kingsditch Industrial Estate Cheltenham, Severnside Trading Estate Stonehouse, Forest Vale Industrial Estate Cinderford and Ashchurch Business Centre Tewkesbury. Freight trunking and regional distribution fleets move across the county via M5 Junction 11 Golden Valley interchange with the A40 Cheltenham, M5 Junction 11A Gloucester Brockworth bypass interchange with the A417, M5 Junction 9 Tewkesbury interchange with the A46, M5 Junction 12 Quedgeley and Hardwicke interchange, and M5 Junction 13 Stroud and Stonehouse interchange with the A419. Gloucestershire's industrial economy is anchored by commercial aircraft landing gear design, shock strut machining and system testing at Safran Landing Systems, alongside commercial ice cream freezing, dairy novelty extrusion and cold chain pallet storage at Walls Gloucester. Across the wider county, businesses also drive cybersecurity defence software development, encrypted communication integration and secure hardware assembly, industrial steam boiler manufacture, condensate pumping systems and energy optimisation engineering, and precision aero-engine nickel superalloy investment casting and turbine blade machining. These hubs connect Gloucester, Cheltenham, Tewkesbury, Stroud, Stonehouse, Cirencester, Dursley, Cinderford, Coleford and Lydney. From deep-freeze pallet racking in Gloucester to heavy aerospace cantilever stores in Brockworth, Tewkesbury and Stonehouse, annual SEMA racking inspections are essential.

All warehouse duty holders, aerospace and steam engineering directors, sub-zero cold-store operators and 3PL logistics managers across Gloucestershire must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including high-bay adjustable pallet racking, heavy-duty cantilever racks, sub-zero drive-in blocks and automated storage systems—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. Across Gloucestershire's industrial parks at Brockworth, Kingsditch, Stonehouse, Ashchurch and Cinderford, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.

When our SEMA Approved Rack Inspectors audit storage systems across Gloucestershire, every defect is classified using SEMA's formal Red, Amber and Green risk grading framework to provide clear engineering priorities. During our physical inspection, we measure upright verticality and bracing integrity over a one-metre gauge length against strict SEMA limits: maximum permissible deformations are 3 millimetres down-aisle, 5 millimetres cross-aisle and 10 millimetres of twist, while beam deflection under load must not exceed 1/180th of the clear span. Where severe mechanical impact, sheared baseplate anchors or permanently bowed beams create an immediate threat to structural stability, we issue a Red risk notice; the affected bay must be offloaded immediately and physically cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without presenting an immediate collapse hazard under current static loads, an Amber risk rating is assigned. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic marks within allowable tolerances are recorded as Green risks for monitoring during future audits. Our comprehensive written report includes bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, alongside practical guidance at https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.

To book an independent SEMA-approved racking inspection anywhere in Gloucestershire, South West, call Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide