For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.
Spanning from the massive deep-water container ports and naval bases of the Solent coast to the highly strategic M3 and A34 logistics corridors driving advanced aerospace R&D and national grocery distribution, Hampshire operates as one of the UK's most diverse and critical industrial powerhouses. Huge industrial warehousing complexes and advanced manufacturing facilities operate relentlessly across Nursling Industrial Estate Southampton, Segensworth Business Park Fareham, Chineham Business Park Basingstoke, Walworth Industrial Estate Andover, and Farnborough Aerospace Centre Business Park Farnborough. Countless freight hauliers and supply chain fleets connect seamlessly via the M3 Junction 6 Basingstoke North interchange, the M27 Junction 3 Southampton Nursling interchange, the M27 Junction 12 Portsmouth Tipner interchange, the M3 Junction 9 Winchester South interchange, and the A303 Andover bypass junction with the A343 Newbury Road. Hampshire's phenomenal industrial economy is heavily anchored by intense container port operations, ro-ro freight, and maritime logistics at the bustling Port of Southampton, alongside critical naval engineering, submarine systems, and defence electronics at Portsmouth Naval Base. Across the wider county, businesses lead the nation in aerospace research, wind tunnel testing, and flight simulation at Farnborough, pharmaceutical formulation, clinical data management, and life sciences distribution, as well as grocery retail distribution, automated fulfilment, and national supply chain logistics in both Andover and Basingstoke. These strategic hubs effortlessly connect Southampton, Portsmouth, Basingstoke, Winchester, Andover, Farnborough, Aldershot, and Fareham. From immense 16-metre VNA distribution racking in Andover to extremely heavy marine and defence cantilever stores in Portsmouth and Southampton, comprehensive annual SEMA racking inspections are absolutely essential across Hampshire to combat aggressive forklift damage and undetected structural fatigue.
All warehouse duty holders, naval engineering directors, aerospace managers, and 3PL distribution operators across Hampshire must comply strictly with the Provision and Use of Work Equipment Regulations 1998, as well as the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers bear a strict statutory duty to ensure that all work equipment, including high-bay adjustable pallet racking, heavy-duty cantilever racks, drive-in blocks, and complex automated storage systems, is maintained in an efficient state, in efficient working order, and in very good repair. Regulation 6 further mandates that where racking is continually exposed to harsh operational conditions causing deterioration liable to result in dangerous situations, it must be thoroughly inspected at suitable intervals by a competent person, and immediately after any exceptional event such as a forklift collision, with written records kept on file. HSG76 firmly establishes a structured three-tier inspection hierarchy to satisfy these fundamental legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately to their supervisors. Second, an officially appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based entirely on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough, unbiased annual technical audit. Across Hampshire's massive grocery hubs in Andover and Basingstoke, aerospace parks in Farnborough, and highly active port stores in Southampton and Portsmouth, failing to uphold PUWER and HSG76 risks massive HSE enforcement notices, voided commercial insurance, and catastrophic, fatal rack failure.
When our qualified SEMA Approved Rack Inspectors audit immense storage systems across Hampshire, every single defect identified is carefully classified using SEMA's formal Red, Amber, and Green risk grading framework to provide facility managers with clear, actionable engineering priorities. During our physical, on-site inspection, we precisely measure upright verticality and bracing integrity over a one-metre gauge length against exceptionally strict SEMA limits: maximum permissible structural deformations are defined as 3 millimetres down-aisle, 5 millimetres cross-aisle, and 10 millimetres of twist, while any beam deflection under a heavy load must never exceed 1/180th of the clear span. Where severe mechanical impact, sheared baseplate anchors, or permanently bowed load beams create an immediate, critical threat to structural stability, we issue a Red risk notice. The affected storage bay must be offloaded immediately and physically cordoned off until it is properly repaired with genuine, load-bearing manufacturer components. Where structural damage exceeds standard SEMA tolerances without presenting an immediate collapse hazard under the current static loads, an Amber risk rating is assigned. Under strict SEMA protocols, once an Amber bay is unloaded, it absolutely cannot be reloaded until repaired, and all Amber repairs must be fully completed within a four-week window before automatically escalating to a Red status. Minor cosmetic marks that fall within allowable tolerances are safely recorded as Green risks for continuous monitoring during future audits. Our highly detailed, digitally delivered written report includes exact bay-by-bay defect coordinates, safe working load notice verification, and floor fixing checks, comprehensively supported by practical guidance available at https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.
To book a comprehensive, independent SEMA-approved racking inspection anywhere in Hampshire, South East, call Rack Safety Inspections today on 0800 654 6955.
Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.