SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Scottish Borders

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Scottish Borders

The Scottish Borders supports a specialised industrial economy combining world-renowned textile mills, precision electronics assembly plants, commercial timber sawmills and chilled food processors across strategic regional estates. At Tweedbank Industrial Estate Galashiels and Pinnaclehill Industrial Estate Kelso, manufacturing warehouses and cleanroom component stores rely on adjustable pallet racking, garment hanging systems and small-parts shelving to support luxury cashmere spinning, automated knitting, garment finishing and textile dyeing in the Borders mills alongside precision electronic printed circuit board surface-mount assembly and test engineering at Kelso. Across the eastern and western Borders, Whinstone View Industrial Estate Coldstream, Duns Industrial Estate Duns and South Park Industrial Estate Peebles house heavy-duty cantilever racking, cold-room pallet racking and assembly stores for commercial forestry roundwood felling, mechanical de-limbing, log grading and automated sawmilling, specialty artisan cheese manufacturing, curd pressing and temperature-controlled maturation, and high-performance mountain bike frame fabrication, component assembly and outdoor testing facilities. Freight connecting these commercial centres travels via the A68 Ravenswood roundabout Melrose junction with A6091, the A7 Galashiels bypass roundabout junction with B3601, the A68 Carfraemill Roundabout junction with A697, the A698 Kelso bypass roundabout junction with B6352 and the A1 Eyemouth junction with A1107. These trunk routes link the region's principal towns including Galashiels, Hawick, Kelso, Peebles, Selkirk, Jedburgh, Duns, Coldstream, Melrose and Eyemouth. In sawmill yards at Duns and Coldstream and yarn warehouses in Galashiels and Hawick, heavy timber packs and dense wool bales subject cantilever arms and pallet beams to substantial loads, making annual inspections by a SEMA Approved Racking Inspector essential.

For mill directors, sawmill managers and warehouse operators across the Scottish Borders, compliance with the Provision and Use of Work Equipment Regulations 1998 (PUWER) is a mandatory statutory duty. Under PUWER Regulation 5, employers must ensure that all storage racking—whether holding cashmere yarn bales at Tweedbank Industrial Estate Galashiels, electronic assemblies at Pinnaclehill Industrial Estate Kelso, or sawn timber packs at Duns Industrial Estate Duns—is maintained in an efficient state, in efficient working order and in good repair. Because storage racking is exposed to mechanical handling impacts, heavy dynamic loading and humid or outdoor environmental conditions, PUWER Regulation 6 requires periodic inspections at suitable intervals by a competent person, with formal written records retained. The Health and Safety Executive's guidance document HSG76, Warehousing and Storage: A Guide to Health and Safety, establishes the three-tier inspection hierarchy required to satisfy PUWER. First, warehouse operatives and forklift drivers must report any rack collision or visible structural defect immediately. Second, an appointed Person Responsible for Racking Safety (PRRS) must carry out and document regular internal visual checks, normally weekly. Third, an annual expert inspection must be performed by an independent specialist such as a SEMA Approved Racking Inspector. Failing to uphold this regime across the Scottish Borders risks HSE enforcement notices, invalidated insurance and prosecution.

When our SEMA Approved Racking Inspector visits a mill, sawmill or warehouse in the Scottish Borders, every racking bay and cantilever structure is assessed against SEMA's engineering tolerances and graded using the traffic-light risk system. Applying a one-metre straightedge to impacted upright columns and frame bracing, our SARI engineer verifies whether deflections remain within SEMA's permissible dimensional limits: 3 millimetres for an upright bent in the plane of the beam, 5 millimetres for an upright bent in the plane of the frame, and 10 millimetres for horizontal or diagonal bracing struts. Items within these limits are graded Green, confirming the bay is safe for continued full-load service while being logged for monitoring at the next annual cycle. Where structural distortion exceeds those thresholds, or where essential components such as beam locking pins or floor anchor bolts are missing without creating an immediate danger of collapse, the defect is classified as Amber; under SEMA protocols, Amber bays must be unloaded within four weeks so certified manufacturer replacement parts can be installed, and any Amber defect remaining loaded beyond twenty-eight days automatically escalates to a Red hazard. Critical damage—including deflections exceeding twice the SEMA tolerance, torn upright profiles or disengaged beam connectors—is classified as Red, requiring immediate offloading and physical isolation of the bay. Our comprehensive written report includes bay-by-bay defect locations, load notice audits and compliance guidance linked to https://www.rackstor.co.uk/sema-racking-inspection-checklist.

Book your certified SEMA racking inspection anywhere in the Scottish Borders or across Scotland by calling Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide