SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Solihull

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Solihull · West Midlands

Solihull is a premier automotive manufacturing, aerospace logistics and corporate business hub situated along the M42 corridor beside Birmingham Airport, where just-in-time component sequencing centres and high-value technical warehouses demand meticulous racking safety. Across Elmdon Trading Estate, Birmingham Business Park and Fore Business Park, automotive tier-one suppliers, aviation freight forwarders and electronics distributors operate high-bay wide-aisle, very narrow aisle (VNA) and live pallet racking alongside heavy stillage systems supporting luxury automotive engineering and prototype components, aviation ground equipment and electronics storage, and financial services and insurance archival records. Within the borough's healthcare and municipal estates, high-density mobile shelving and clinical stores safeguard NHS secondary care clinical archives at Solihull Hospital (University Hospitals Birmingham NHS Foundation Trust) and metropolitan council statutory registries and tax records at Solihull Council Civic Centre Homer Road. Commercial freight serving Solihull's business and industrial estates flows continuously through M42 Junction 4, M42 Junction 5, M42 Junction 6, the A45 Coventry Road and the A34 Stratford Road. This strategic motorway corridor connects Solihull directly with surrounding towns and districts including Birmingham, Coleshill, Knowle, Dorridge, Shirley, Castle Bromwich, Redditch and Coventry. In automotive sequencing warehouses on Elmdon Trading Estate and aviation logistics hubs near M42 Junction 6, 24/7 reach-truck and VNA turret-truck operations handling heavy metal stillages, powertrain sub-assemblies and palletised airfreight place severe dynamic loads on pallet beams and upright frames. Even minor lower-leg impacts or missing beam locking pins in a high-bay sequencing rack can halt production lines or trigger a catastrophic collapse, making annual inspections by a SEMA Approved Racking Inspector essential.

For automotive supply chain directors, aviation logistics managers and public sector duty holders in Solihull, compliance with the Provision and Use of Work Equipment Regulations 1998 (PUWER) is a strict statutory requirement. Under PUWER Regulation 5, every employer must ensure that storage racking—whether holding automotive prototype components on Elmdon Trading Estate, electronics inventory at Birmingham Business Park, or clinical archives at Solihull Hospital—is maintained in an efficient state, in efficient working order and in good repair. Because pallet racking in just-in-time logistics environments is exposed to continuous mechanical handling impacts and heavy cyclic loading that can cause deterioration, PUWER Regulation 6 mandates periodic inspections at suitable intervals by a competent person, with formal written records retained. The Health and Safety Executive's authoritative guidance document HSG76, Warehousing and Storage: A Guide to Health and Safety, defines the mandatory three-tier inspection hierarchy required to satisfy PUWER. First, warehouse operatives and forklift drivers must report any rack strike or visible structural fault immediately. Second, an appointed Person Responsible for Racking Safety (PRRS) must conduct and log regular internal visual checks, normally weekly. Third, an annual expert inspection must be performed by an independent specialist such as a SEMA Approved Racking Inspector. Failing to uphold this regime in Solihull's automotive, aviation and corporate sectors risks HSE enforcement notices, invalidated insurance and prosecution.

When our SEMA Approved Racking Inspector evaluates a sequencing centre, logistics warehouse or archive facility in Solihull, every racking bay is measured against SEMA's engineering codes and graded using the traffic-light risk system. Applying a one-metre straightedge to impacted upright posts and frame bracing, our SARI engineer verifies whether deflections remain within SEMA's permissible dimensional limits: 3 millimetres for an upright bent in the plane of the beam, 5 millimetres for an upright bent in the plane of the frame, and 10 millimetres for horizontal or diagonal bracing struts. Items within these thresholds are graded Green, confirming the bay is safe for continued full-load operation while being recorded for monitoring at the next annual visit. Where frame or bracing damage exceeds those limits, or where essential components such as beam locking pins or floor anchor bolts are missing without creating an immediate danger of collapse, the defect is classified as Amber; under SEMA protocols, Amber bays must be unloaded within four weeks so certified manufacturer parts can be installed, and any Amber defect remaining loaded beyond twenty-eight days automatically escalates to a Red hazard. Severe defects—including deflections exceeding twice the SEMA tolerance, torn upright profiles or disengaged beam connectors—are graded Red, requiring immediate offloading and physical isolation of the bay. Our detailed written report includes defect schedules, load notice audits and compliance guidance linked to https://www.rackstor.co.uk/sema-racking-inspection-checklist.

Contact Rack Safety Inspections on 0800 654 6955 to book your certified SEMA racking inspection in Solihull or anywhere across the West Midlands.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide