SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection South Lanarkshire

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
South Lanarkshire

South Lanarkshire forms a critical manufacturing, aerospace, semiconductor and food processing belt along the M74 corridor south-east of Glasgow, where high-capacity pallet and cantilever racking systems operate under demanding shift patterns. In East Kilbride, Peel Park Industrial Estate East Kilbride and Kelvin Industrial Estate East Kilbride house cleanroom component stores, aerospace machine shops and regional chilled dairy hubs utilizing narrow-aisle, wide-aisle and drive-in pallet racking to support semiconductor power module packaging, microelectronic cleanroom assembly and test engineering at East Kilbride alongside precision aero-engine rotating component machining, vacuum heat treatment and thermal barrier coating and commercial fresh milk homogenization, plastic bottle blow-moulding and refrigerated dairy distribution. Along the Clyde Valley at Bothwell Park Industrial Estate Uddingston, Strutherhill Industrial Estate Larkhall and Castlehill Industrial Estate Carluke, food factories and heavy plant engineering workshops operate high-bay adjustable pallet racking and heavy-duty cantilever racks for commercial biscuit and confectionery manufacturing, continuous chocolate enrobing and packaging at Tunnock's and heavy earthmoving plant refurbishment, hydraulic cylinder overhaul and mining machine testing. Freight vehicles serving South Lanarkshire move through M74 Junction 4 Maryville interchange with M73, M74 Junction 8 Canderside interchange with A71, the A725 Kingsway East Kilbride roundabout with A726, M74 Junction 7 Larkhall interchange with A72 and the A726 Strathaven bypass junction with A71. These routes connect East Kilbride, Hamilton, Rutherglen, Cambuslang, Uddingston, Larkhall, Carluke, Lanark and Strathaven. Heavy hydraulic rams, aero-engine alloys and rapid chilled dairy forklift movements make annual inspections by a SEMA Approved Racking Inspector vital across South Lanarkshire.

For manufacturing directors, food production managers and engineering duty holders across South Lanarkshire, compliance with the Provision and Use of Work Equipment Regulations 1998 (PUWER) is a strict statutory requirement. Under PUWER Regulation 5, employers must ensure that all storage racking—whether holding aerospace components at Kelvin Industrial Estate East Kilbride, confectionery ingredients at Bothwell Park Industrial Estate Uddingston, or heavy hydraulic rams at Strutherhill Industrial Estate Larkhall—is maintained in an efficient state, in efficient working order and in good repair. Because pallet and cantilever racking is exposed to mechanical handling collisions, heavy cyclic loading and chilled dairy environments that can cause structural deterioration, PUWER Regulation 6 requires periodic inspections at suitable intervals by a competent person, with formal written records retained. The Health and Safety Executive's guidance publication HSG76, Warehousing and Storage: A Guide to Health and Safety, defines the mandatory three-tier inspection hierarchy required to satisfy PUWER. First, warehouse operatives and forklift drivers must report any rack strike or visible structural fault immediately. Second, an appointed Person Responsible for Racking Safety (PRRS) must perform and log regular internal visual checks, normally weekly. Third, an annual expert inspection must be conducted by an independent specialist such as a SEMA Approved Racking Inspector. Failing to uphold this regime across South Lanarkshire's aerospace, food and heavy engineering sectors risks HSE enforcement notices, invalidated insurance and prosecution.

Every SEMA racking inspection we perform in South Lanarkshire delivers a rigorous, engineering-led evaluation of your storage systems, classifying every recorded observation under SEMA's traffic-light risk system. Using a one-metre straightedge against impacted upright columns and frame bracing, our SARI-qualified engineer measures whether deflections fall within SEMA's maximum permissible tolerances of 3 millimetres in the down-aisle direction, 5 millimetres in the cross-aisle plane and 10 millimetres on horizontal or diagonal bracing struts. Components within these limits are graded Green, confirming the bay remains safe for full rated loading while being documented for monitoring at the next annual cycle. Where structural distortion exceeds those thresholds, or where essential components such as beam safety locks or floor anchor bolts are missing without creating an immediate collapse hazard, the defect is classified as Amber; under SEMA protocols, Amber bays must be unloaded within four weeks so certified manufacturer replacement parts can be installed, and any Amber defect remaining loaded beyond twenty-eight days automatically escalates to a Red hazard. Severe damage—including deflections exceeding twice the SEMA tolerance, torn steel uprights or damaged beam connectors—is classified as Red, requiring immediate offloading and physical isolation of the bay. Our comprehensive written report includes bay-by-bay defect locations, load notice audits and compliance guidance referencing https://www.rackstor.co.uk/sema-racking-inspection-checklist.

Call Rack Safety Inspections on 0800 654 6955 to arrange a certified SEMA racking inspection anywhere in South Lanarkshire or across Scotland.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide