Pallet Racking Inspection Speke
Speke serves as a premier automotive biopharma and freight hub adjacent to Liverpool John Lennon Airport requiring strict SEMA safety compliance. Our SARI accredited inspectors visit sites in Speke for annual expert inspections, giving you a dated, signed record of the condition of your racking.
Racking Sites Across Speke
From Speke Hall Industrial Estate to Boulevard Industry Park, we inspect pallet racking at sites throughout Speke. We aim to send the Speke inspection report within 48 hours, covering every bay inspected and any repairs needed.
Inspection Priorities for Speke Sites
Some risks are common to the operations described above, so our Speke inspectors look closely at them.
- In high-volume operations the lower levels and aisle-end frames take most of the knocks, so we check frame protectors, column guards and beam connectors at every run end.
- Manufacturing and engineering stores often hold heavy, awkward or non-standard loads, so we check that load notices match the configuration actually installed.
- Sensitive and high-value products make any racking failure costly, so our report gives a prioritised repair list the site can act on straight away.
- Baseplates and floor fixings are checked for missing anchors and damage where trucks turn at aisle ends.
Your Legal Duty in Speke
PUWER 1998 requires racking to be maintained in a safe condition and inspected by a competent person, and HSE guidance HSG76 recommends an expert inspection at least every 12 months. Our Speke reports follow BS EN 15635 and the SEMA Code of Practice, so the record stands up if the HSE or your insurer asks for it. Keeping the annual report on file is the simplest way for a Speke business to show the racking is being managed.
See our SEMA racking inspection checklist for the measured tolerances, or read what the HSE expects.