SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Wiltshire

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Wiltshire

Wiltshire spans a vast South West agricultural and military landscape, strategically bisected by the M4 and A303 corridors, where specialist aerospace engineering, food distribution and military logistics hubs rely on structurally resilient pallet and cantilever racking. Across Blagrove Industrial Estate Swindon, West Wilts Trading Estate Westbury and Solstice Park Amesbury, major automotive research facilities, national grocery distribution centres and aerospace composite plants operate fourteen-metre very narrow aisle (VNA), wide-aisle, chilled drive-in and heavy-duty cantilever racking systems to support high-speed digital electric motor development, cyclonic filtration laboratory testing and design robotics at Malmesbury, national automated temperature-controlled grocery logistics, deep-freeze automated pallet stores and line-haul distribution, and carbon composite aerospace structural panel moulding, autoclave pre-preg curing and satellite antenna assembly. Further south and west at Castlegate Business Park Salisbury and Porte Marsh Industrial Estate Calne, engineering stores and food processing depots manage military tracked vehicle chassis overhaul, armored turret integration and defense logistics staging across Salisbury Plain and specialty cultured dairy processing, continuous probiotic yogurt fermentation and automated aseptic pot filling. Freight traffic serving Wiltshire's industrial corridors travels via M4 Junction 16 Swindon West interchange with A3102, M4 Junction 17 Chippenham interchange with A350, the A303 Countess Roundabout Amesbury junction with A345, the A36 Salisbury bypass roundabout junction with A30 London Road and the A350 Westbury bypass junction with B3097. These trunk routes connect Swindon, Salisbury, Trowbridge, Chippenham, Melksham, Devizes and Warminster. Dense chilled food pallets, heavy military vehicle spares and 24/7 VNA reach-truck movements create continuous impact risks, making annual SEMA racking inspections essential across Wiltshire to prevent structural failure.

For grocery logistics directors, aerospace engineering managers and military supply duty holders across Wiltshire, compliance with the Provision and Use of Work Equipment Regulations 1998 (PUWER) is a strict statutory obligation. Under PUWER Regulation 5, employers must ensure that all storage equipment—whether in a high-bay chilled distribution hub at Solstice Park Amesbury, an aerospace store at Blagrove Industrial Estate Swindon, or a military logistics depot at Castlegate Business Park Salisbury—is maintained in an efficient state, in efficient working order and in good repair. Because pallet and cantilever racking is exposed to continuous mechanical handling collisions, heavy dynamic loading and sub-zero environments that can cause deterioration, PUWER Regulation 6 requires periodic inspections at suitable intervals by a competent person, with formal written records retained. The Health and Safety Executive's guidance document HSG76, Warehousing and Storage: A Guide to Health and Safety, defines the mandatory three-tier inspection hierarchy required to satisfy PUWER. First, warehouse operatives and forklift drivers must report any rack strike or visible structural fault immediately. Second, an appointed Person Responsible for Racking Safety (PRRS) must carry out and log regular internal visual checks, normally weekly. Third, an annual expert inspection must be performed by an independent specialist such as a SEMA Approved Racking Inspector. Failing to uphold this regime across Wiltshire's aerospace, food and military sectors risks HSE enforcement notices, invalidated insurance and prosecution.

During a SEMA racking inspection in Wiltshire, our SARI-qualified engineer conducts a thorough structural assessment of every pallet rack, VNA aisle, drive-in lane and cantilever frame, grading each defect under SEMA's traffic-light risk system. Using a one-metre straightedge on impacted upright columns and frame bracing, we verify whether deformations fall within SEMA's maximum permissible limits of 3 millimetres in the down-aisle plane, 5 millimetres in the cross-aisle plane and 10 millimetres on horizontal or diagonal bracing struts. Components within these thresholds are graded Green, confirming they remain safe for normal working loads while being documented for monitoring at the next annual cycle. Where frame or bracing damage exceeds those limits, or where essential components such as beam locking pins or floor anchor bolts are missing without creating an immediate danger of collapse, the defect is classified as Amber; under SEMA protocols, Amber bays must be unloaded within four weeks so certified manufacturer replacement parts can be installed, and any Amber defect left loaded beyond twenty-eight days automatically escalates to a Red hazard. Critical damage—including deflections exceeding twice the SEMA limit, buckled upright profiles or disengaged beam connectors—is classified as Red, requiring immediate offloading and physical isolation of the bay. Our comprehensive written report includes bay-by-bay defect locations, load notice audits and compliance guidance referencing https://www.rackstor.co.uk/sema-racking-inspection-checklist.

Call Rack Safety Inspections on 0800 654 6955 to book your certified SEMA racking inspection anywhere in Wiltshire or across the South West.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide