Pallet Racking Inspection Fife — SEMA-Aligned Inspectors

From Rosyth's port operations to the M90 distribution parks around Dunfermline, Fife's warehouses cover a genuinely broad mix of manufacturing, electronics and logistics racking — all subject to the same PUWER inspection duty.

Pallet Racking Inspection Across Fife

Fife's industrial landscape spans Rosyth's naval dockyard turned commercial port, Glenrothes' electronics and manufacturing heritage, and Dunfermline's growing distribution sector on the M90 corridor linking Edinburgh and the north.

We regularly inspect racking installations across Fife, including in:

• Kirkcaldy
• Dunfermline
• Glenrothes
• St Andrews
• Rosyth
• Cupar

This page is part of our nationwide SEMA Racking Inspection service, covering Fife and every other UK county.

Racking Inspection Law: What Applies in Fife

There is no separate "racking regulation" — the duty sits inside PUWER 1998, which treats pallet racking as work equipment like any other machine on your Fife site. That means an employer must keep it safe, maintain it, and arrange inspection by a competent person at intervals suitable to the risk. HSE guidance HSG76 puts a figure on it: an expert inspection carried out by a SARI accredited inspector no less than once every 12 months, on top of your own weekly visual checks. Non-compliance is a criminal matter, carrying unlimited fines and, in the gravest cases, custodial sentences.

The SEMA Red, Amber and Green System

SEMA's three-tier damage classification underpins the whole report. Each component we assess is graded, and the grade dictates the response:

• Green — the component is in acceptable condition. No action required.
• Amber — the component is damaged. The bay must be off-loaded or its safe working load reduced until repaired within four weeks.
• Red — the component is dangerously damaged. The bay must be off-loaded and taken out of service immediately until repaired or replaced.

What the Inspection Covers in Fife

Every Fife inspection is carried out to HSG76 and BS EN 15635 and covers every safety-critical element of your racking installation:

• Upright frames — checked for bends, buckles, splits, twists and corrosion
• Beams and beam connectors — verified for damage and correct engagement
• Baseplates and floor fixings — inspected for lift, cracks and looseness
• Safety clips and locking pins — confirmed present and engaged on every beam
• Load notices — checked for presence, legibility and accuracy
• Floor fixings and frame protection — assessed across the installation

What Happens After Your Inspection in Fife

Within 48 hours of completing your Fife inspection you will receive a full written report. Every defect is photographed and described, classified red, amber or green, with a clear recommendation for repair or replacement. For amber and red defects we can provide a fixed-price repair quotation on the same day. Rackstor Safety Inspections carries out racking repairs across the UK, typically within 3–5 working days of the inspection report.

Why Fife Warehouses Use Rackstor Safety Inspections

• Every finding graded green, amber or red — no ambiguity
• Inspectors accredited under SARI and working to SEMA guidelines
• Experience across APR, drive-in, narrow aisle, cantilever and mezzanine
• One point of contact for inspection, repair and load notices
• Prices agreed up front, usually quoted the same day
• Report evidence you can hand straight to an HSE inspector

Book a Racking Inspection in Fife

For a fixed-price quotation on a SEMA-aligned racking inspection anywhere in Fife, call 0800 654 6955 or use the form below. We respond the same day.