SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Bardon Hill

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Bardon Hill · Leicestershire

Commanding the M1 Junction 22 corridor in north-west Leicestershire, Bardon Hill has grown into one of the East Midlands' premier mega-logistics, pharmaceutical warehousing, cold-chain distribution, and heavy quarrying centres. Major commercial and industrial estates across the locality include Bardon Business Park, Interlink Business Park, Bardon 22 Logistics Park, Mountpark Bardon, and Bardon Hill Quarry (Aggregate Industries). High-capacity storage installations across these estates support national logistics, commercial warehousing and supply chain hubs, e-commerce fulfilment, parcel sorting and freight forwarding, high-bay distribution, pharmaceuticals and consumer goods storage, cold-chain logistics, third-party haulage and fleet operations, and quarrying, aggregates processing and construction materials. Articulated freight fleets operating twenty-four hours a day rely directly upon M1 Junction 22 (Markfield), the A511 Shaw Lane, the A50 Leicester Road, A42 Junction 13 (Ashby-de-la-Zouch), and the B591 Copt Oak Road. The sheer height, density, and pace of handling across Mountpark Bardon, Bardon 22 Logistics Park, Interlink Business Park, and Bardon Business Park create exacting racking inspection challenges. Towering very-narrow-aisle, double-deep, push-back, and drive-in pallet racking installations endure relentless multi-shift reach-truck and VNA turret-truck cycles fulfilling national e-commerce, pharmaceutical, and FMCG orders. Even minor truck impacts at floor level can twist high-bay uprights, shear guide-rail anchors, damage diagonal bracing, or dislodge beam safety locks, while temperature-controlled cold-chain chambers reduce steel ductility and conceal floor-fixing defects under frost. At Bardon Hill Quarry and heavy plant stores, massive crusher wear parts, conveyor rollers, and hydraulic assemblies impose severe point loads on heavy-duty pallet and cantilever racking. Our independent SEMA Approved Racking Inspectors regularly attend facilities at Bardon Hill and surrounding towns including Coalville, Ashby-de-la-Zouch, Loughborough, Hinckley, Markfield, Shepshed, and Ibstock, delivering rigorous inspections that protect high-bay supply chains from unplanned downtime.

Every national 3PL provider, e-commerce fulfilment centre, pharmaceutical distributor, cold-store operator, and quarry engineering store at Bardon Hill is legally governed by the Provision and Use of Work Equipment Regulations 1998 (PUWER). Regulation 5 mandates that all pallet racking, VNA installations, drive-in systems, and heavy plant storage frames be maintained in an efficient state, in efficient working order, and in good repair. Regulation 6 requires formal inspections at suitable intervals by a competent person whenever work equipment is exposed to conditions causing deterioration liable to result in a dangerous situation—a threshold exceeded every day inside twenty-four-hour distribution hubs at Mountpark Bardon, Bardon 22 Logistics Park, Interlink Business Park, and Bardon Business Park. Health and Safety Executive guidance HSG76 establishes the three-tier inspection hierarchy required to demonstrate robust compliance: immediate reporting of any forklift collision or racking defect by warehouse operatives, documented weekly visual inspections carried out internally by a trained Person Responsible for Racking Safety (PRRS), and at least one annual expert inspection conducted independently by a SEMA Approved Racking Inspector. Falling short of this standard in Leicestershire carries severe consequences, including HSE Prohibition Notices freezing high-bay aisles, unlimited prosecution fines, MHRA GDP compliance failures in pharmaceutical stores, and voided insurance cover.

Inside the high-bay mega-sheds of Bardon Hill, a few millimetres of unaddressed column deformation can compromise multi-tonne vertical load paths across ten-metre or fifteen-metre frames. Surveying warehouses off M1 Junction 22 (Markfield) and the A511 Shaw Lane, our SEMA Approved Racking Inspector measures every upright, brace, beam connector, and floor anchor against strict SEMA geometric tolerances and assigns a Red, Amber, or Green risk grade. Using a one-metre straight edge along upright columns, front-to-back deflections up to 3mm in the plane of the frame or side-to-side bends up to 5mm in the plane of the beam qualify as Green Risk items that remain safe for continued service subject to routine monitoring at the next annual audit. Horizontal beams are checked against the span divided by 200 deflection limit under rated pallet weights. Where damage exceeds those tolerances, clear traffic-light timescales dictate remedial action: an Amber Risk flags hazardous damage that must be repaired within four weeks before automatically escalating to Red status—and once stock is cleared from an Amber location, it must never be reloaded prior to repair; a Red Risk denotes severe structural compromise requiring immediate offloading and physical isolation until certified repairs restore full capacity. You receive an audit-ready written report mapping aisle, bay, and level coordinates, defect photographs, load notice checks, and a prioritised repair schedule. Prepare your team beforehand at https://www.rackstor.co.uk/sema-racking-inspection-checklist.

Protect your high-bay logistics hub, cold store, or industrial depot at Bardon Hill and across the East Midlands by calling Rack Safety Inspections on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide