Pallet Racking Inspection Chippenham
Chippenham is a key industrial location on the M4 corridor requiring periodic SEMA rack safety audits. For operators in Chippenham, we provide independent SEMA-aligned inspections by SARI accredited inspectors, reported in writing so the condition of your racking is documented rather than assumed.
Chippenham's Storage and Distribution Network
Locations we cover in Chippenham include Bumper's Farm Industrial Estate, Langley Park and Methuen Park. Wherever your racking is installed, the inspection follows the same SEMA-aligned method. Load notices, beam locks and floor fixings are all checked during a Chippenham inspection, not just visible impact damage.
Racking Risks Typical of Chippenham's Industries
Racking in Chippenham is inspected bay by bay; these are the areas that usually need the most care.
- Column guards and run-end barriers are inspected, and gaps in protection are recorded alongside the damage they allow.
Book a SEMA-aligned inspection in Chippenham
Written report within 48 hours of the visit.
Your Legal Duty in Chippenham
PUWER 1998 requires racking to be maintained in a safe condition and inspected by a competent person, and HSE guidance HSG76 recommends an expert inspection at least every 12 months. Our Chippenham reports follow BS EN 15635 and the SEMA Code of Practice, so the record stands up if the HSE or your insurer asks for it. Our Chippenham report gives you the evidence that this duty is being met.
See our SEMA racking inspection checklist for the measured tolerances, or read what the HSE expects.