SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Salisbury

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Salisbury · Wiltshire

Salisbury serves as the commercial, defence science and healthcare hub of South Wiltshire, where precision engineering estates, A303 distribution parks and historic institutions depend on structurally verified racking and shelving systems. Across Churchfields Industrial Estate and Old Sarum Business Park, trade wholesalers, precision metal fabricators and light manufacturers operate adjustable pallet racking, vertical bar racks and heavy-duty cantilever systems supporting precision metal machining and engineering hardware alongside defence science and biomedical research archives. Further north at Solstice Park (Amesbury) on the A303 corridor, large regional food distribution centres and commercial logistics hubs run high-bay wide-aisle and narrow-aisle pallet racking. Within Salisbury's healthcare, municipal and heritage quarters, high-density mobile shelving and specialist archive racking safeguard NHS regional burns and plastic surgery patient records at Salisbury District Hospital (Salisbury NHS Foundation Trust), unitary council municipal and planning records at Wiltshire Council Bourne Hill Offices, and cathedral heritage archives and conservation documents. Freight and service vehicles accessing Salisbury's industrial zones travel via the A36 Southampton Road, the A30 London Road, the A345 Castle Road, the A303 corridor via A345 and the A338 Downton Road. These strategic routes connect Salisbury with surrounding towns including Amesbury, Wilton, Downton, Tidworth, Andover, Romsey and Ringwood. In busy builders merchants and precision engineering workshops on Churchfields Industrial Estate, compact yard and warehouse layouts combined with heavy counterbalance forklift movements increase the incidence of upright leg strikes, bent footplates and overloaded cantilever arms. Meanwhile, high-bay distribution warehouses at Solstice Park (Amesbury) experience rapid reach-truck pallet turnover that can dislodge beam safety locks. Annual inspections by a SEMA Approved Racking Inspector protect Salisbury businesses against hidden structural failure.

For warehouse managers, defence science contractors and public sector estate officers in Salisbury, compliance with the Provision and Use of Work Equipment Regulations 1998 (PUWER) is a strict legal obligation. Under PUWER Regulation 5, every employer must ensure that storage racking and shelving—whether holding palletised freight at Solstice Park (Amesbury), precision metal stock at Churchfields Industrial Estate, or specialist clinical records at Salisbury District Hospital—is maintained in an efficient state, in efficient working order and in good repair. Because storage racking is exposed to mechanical handling collisions and cyclic loading stresses that can cause deterioration, PUWER Regulation 6 requires periodic inspections at suitable intervals by a competent person, with formal written records retained. The Health and Safety Executive's guidance publication HSG76, Warehousing and Storage: A Guide to Health and Safety, defines the mandatory three-tier inspection hierarchy required to satisfy PUWER. First, warehouse operatives and forklift drivers must report any rack collision or visible structural defect immediately. Second, an appointed Person Responsible for Racking Safety (PRRS) must carry out and log regular internal visual checks, typically weekly. Third, an annual expert inspection must be conducted by an independent specialist such as a SEMA Approved Racking Inspector. Failing to follow HSG76 in Salisbury's defence research, engineering and logistics sectors risks HSE enforcement notices, invalidated insurance and prosecution.

When our SEMA Approved Racking Inspector surveys a facility in Salisbury, every racking bay, cantilever arm and shelving run is evaluated against SEMA's engineering tolerances and graded using the traffic-light risk system. Applying a one-metre straightedge to impacted upright columns and frame bracing, our SARI engineer verifies whether deflections remain within SEMA's permissible dimensional limits: 3 millimetres for an upright bent in the plane of the beam, 5 millimetres for an upright bent in the plane of the frame, and 10 millimetres for horizontal or diagonal bracing struts. Observations within these limits are graded Green, confirming the bay is safe for continued full-load use while being logged for monitoring at the next annual cycle. Where structural distortion exceeds those thresholds, or where essential components such as beam locking pins or floor anchor bolts are missing without creating an immediate danger of collapse, the defect is classified as Amber; under SEMA protocols, Amber bays must be unloaded within four weeks so certified manufacturer parts can be installed, and any Amber defect remaining loaded beyond twenty-eight days automatically escalates to a Red hazard. Critical damage—including deflections exceeding twice the SEMA tolerance, torn upright profiles or disengaged beam connectors—is classified as Red, requiring immediate offloading and physical isolation of the bay. Our comprehensive written report includes bay-by-bay defect locations, load notice audits and compliance guidance linked to https://www.rackstor.co.uk/sema-racking-inspection-checklist.

To book your certified SEMA racking inspection in Salisbury or anywhere in the South West, call Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide