Pallet Racking Inspection Clacton-on-Sea
Clacton-on-Sea hosts plastic molding marine engineering and commercial supply chains requiring periodic racking checks. Our SARI accredited inspectors visit sites in Clacton-on-Sea for annual expert inspections, giving you a dated, signed record of the condition of your racking.
Where We Inspect in Clacton-on-Sea
Clacton-on-Sea's racking is found across Gorse Lane Industrial Estate and Oakwood Business Park. Our inspectors plan visits around these locations and cover the surrounding parts of Essex in the East of England too. You will not be left guessing after we inspect in Clacton-on-Sea: every finding is located, photographed and explained in plain language.
Racking Risks Typical of Clacton-on-Sea's Industries
Every Clacton-on-Sea inspection covers the whole installation, with particular attention to the following.
- Manufacturing and engineering stores often hold heavy, awkward or non-standard loads, so we check that load notices match the configuration actually installed.
- Frames are checked for out-of-plumb against the BS EN 15635 limit, measured rather than judged by eye.
Book a SEMA-aligned inspection in Clacton-on-Sea
Written report within 48 hours of the visit.
Your Legal Duty in Clacton-on-Sea
Racking counts as work equipment under PUWER 1998. HSE guidance HSG76 and BS EN 15635 expect weekly in-house checks by a Person Responsible for Racking Safety plus at least an annual expert inspection — the part our SARI accredited inspectors deliver in Clacton-on-Sea. Our Clacton-on-Sea report gives you the evidence that this duty is being met.
See our SEMA racking inspection checklist for the measured tolerances, or read what the HSE expects.