SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Crawley

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Crawley · Sussex

Situated immediately adjacent to London Gatwick Airport along the M23 corridor, Crawley is one of the South East's premier aviation, defence engineering and international logistics hubs. High-density warehousing and specialist storage facilities are concentrated across Crawley Hospital (Surrey and Sussex Healthcare NHS Trust), Crawley Borough Council Town Hall The Boulevard, Manor Royal Business District, Gatwick International Distribution Centre and Lowfield Heath Industrial Area. Freight forwarders and regional distributors enjoy rapid access via M23 Junction 10, M23 Junction 10A Maidenbower, the A2011 Crawley Avenue, the A23 London Road corridor and the A264 Horsham Road. Crawley's industrial economy centres on commercial aviation avionics, flight simulator parts and aircraft spares, alongside Gatwick Airport freight handling and bonded warehousing archives. Within Manor Royal and surrounding estates, businesses also manage medical device assembly and pharmaceutical packaging storage, NHS community hospital medical records and outpatient clinic charts, and borough council planning applications, deeds and building control files. These commercial operations serve a wide catchment of surrounding towns including Horley, Horsham, East Grinstead, Redhill, Reigate, Burgess Hill and Haywards Heath. Storage systems across Crawley operate under intense time-critical pressures: bonded air-cargo terminals at Gatwick International Distribution Centre and Lowfield Heath experience 24-hour forklift turnarounds where rapid loading of air-freight pallets increases the risk of upright leg strikes and dislodged beam clips, while aerospace facilities on Manor Royal store high-value flight simulator assemblies, avionics test rigs and sterile medical devices on high-bay adjustable pallet racking and cantilever frames. Independent SEMA-approved racking inspections are vital in Crawley to ensure structural integrity and uninterrupted aviation and pharmaceutical supply chains.

For warehouse duty holders across Crawley, from bonded air-cargo operators at Lowfield Heath to aerospace manufacturers on Manor Royal Business District, compliance with the Provision and Use of Work Equipment Regulations 1998 and HSE guidance document HSG76 is a mandatory legal obligation. PUWER Regulation 5 states that every employer must ensure work equipment—explicitly encompassing pallet racking, cantilever frames and multi-tier shelving—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 requires that where racking safety depends on installation conditions or is exposed to operational deterioration liable to create dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a major MHE impact. HSG76 sets out a structured three-tier inspection hierarchy to meet these duties. Tier one requires forklift operators and warehouse personnel to report any rack collision or defect immediately. Tier two mandates regular weekly or monthly documented visual inspections by a trained Person Responsible for Racking Safety. Tier three requires a comprehensive annual inspection by an independent SEMA Approved Rack Inspector. In Crawley's regulated aviation, customs-bonded and medical device sectors, failing to uphold PUWER Regulations 5 and 6 risks HSE enforcement action, loss of regulatory accreditations, voided insurance policies and catastrophic rack collapse.

Our SEMA Approved Rack Inspectors provide Crawley businesses with a thorough, independent structural assessment graded under SEMA's Red, Amber and Green risk system. Every accessible frame upright, bracing strut, load beam, safety lock and floor fixing is examined against strict SEMA engineering tolerances. Over a one-metre measurement gauge, upright deflections exceeding 3 millimetres in the down-aisle direction, 5 millimetres in the cross-aisle plane or 10 millimetres of rotational twist violate permissible limits. Where impact damage, missing anchors or beam overloading exceeding 1/180th of the span creates a critical threat to stability, the inspector assigns a Red risk rating; that bay must be offloaded immediately and cordoned off until repaired with approved manufacturer parts. Where a component exceeds SEMA tolerances without presenting an immediate collapse hazard under its existing static load, an Amber risk rating is issued. Under SEMA guidelines, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber defects must be rectified within four weeks before automatically escalating to Red status. Minor scuffs within allowable tolerances are logged as Green risks for monitoring at the next annual audit. Our detailed written report maps every defect by aisle and bay, checks SWL notices and links with https://www.rackstor.co.uk/sema-racking-inspection-checklist to guide your internal PRRS checks.

To arrange a SEMA-approved racking inspection in Crawley, South East, call Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide