SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Deeside

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Deeside · Wales

Spanning the Dee Estuary on the Wales-England border, Deeside is one of Europe's largest advanced manufacturing zones, driving commercial aerospace wing production, steelmaking, paper conversion and food processing. Massive industrial warehouses and institutional storage facilities operate across Deeside Industrial Park, Deeside Community Hospital, Coleg Cambria Deeside Campus, Airbus Broughton (serving Deeside) and Ty Dewi Sant (Flintshire County Council, Ewloe). HGV fleets and abnormal engineering loads connect directly to the national motorway network via the A550 Welsh Road, the A494 Queensferry Bypass, the A548 Chester Road, the A55 North Wales Expressway (Ewloe Interchange) and the B5129 Kelsterton Road. Deeside's industrial economy is anchored by paper manufacturing, food processing, steelworks and North Wales logistics across Deeside Industrial Park, alongside commercial aircraft wing manufacturing and aerospace compliance files at Airbus Broughton. Regional public and educational facilities manage Betsi Cadwaladr NHS community inpatient care and medical records at Deeside Community Hospital, further education, aerospace engineering training and student records at Coleg Cambria, and county council public services, planning and administrative archives at Ty Dewi Sant in Ewloe. These major employment sites link surrounding towns including Queensferry, Shotton, Connah's Quay, Buckley, Mold, Flint, Hawarden and Chester. Storage systems across Deeside face extraordinary structural demands: aerospace component halls and steel processing hubs store long aluminium extrusions, carbon-fibre wing sub-assemblies and heavy steel coils on heavy-duty cantilever racking and reinforced adjustable pallet racking, while chilled food plants and paper mills on Deeside Industrial Park operate high-bay narrow-aisle and drive-in racking under 24-hour reach-truck and clamp-truck shifts. Annual SEMA-approved racking inspections are essential across Deeside to detect upright deformation, floor bolt shear and beam overloading.

All warehouse duty holders, aerospace supply chain managers and industrial operators in Deeside must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including adjustable pallet racking, heavy-duty cantilever racks, drive-in blocks and archive shelving—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and following any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. In Deeside's high-consequence aerospace, steel and food manufacturing warehouses, failing to maintain this three-tier regime risks HSE enforcement notices, invalidated insurance, loss of AS9100 or BRCGS compliance and catastrophic rack failure.

When our SEMA Approved Rack Inspectors audit storage systems in Deeside, every defect is classified using SEMA's formal Red, Amber and Green risk grading framework to provide clear engineering priorities. During our physical inspection, we measure upright verticality and bracing integrity over a one-metre gauge length against strict SEMA limits: maximum permissible deformations are 3 millimetres down-aisle, 5 millimetres cross-aisle and 10 millimetres of twist, while beam deflection under load must not exceed 1/180th of the clear span. Where severe mechanical impact, sheared baseplate anchors or permanently bowed beams create an immediate threat to structural stability, we issue a Red risk notice; the affected bay must be offloaded immediately and physically cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without presenting an immediate collapse hazard under current static loads, an Amber risk rating is assigned. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber defects must be rectified within four weeks before automatically escalating to Red status. Minor cosmetic marks within allowable tolerances are recorded as Green risks for monitoring during future audits. Our comprehensive written report includes bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, alongside practical guidance at https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.

To book an independent SEMA-approved racking inspection in Deeside, Wales, call Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide