SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection East Kilbride

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
East Kilbride · Scotland

Established as Scotland's first and largest new town just south-east of Glasgow, East Kilbride is a powerhouse of aero-engine overhaul, semiconductor wafer testing, commercial distribution and central government archiving. Major industrial warehousing and institutional storage facilities operate across Hairmyres Hospital (NHS Lanarkshire) Eaglesham Road, South Lanarkshire Council East Kilbride Civic Centre, Kelvin Industrial Estate, College Milton Industrial Estate and Peel Park Business Centre. Freight and regional distribution vehicles connect rapidly to the motorway network via the A725 East Kilbride Expressway, the A726 Queensway / Kingsway, M77 Junction 5 via the A726, M74 Junction 5 via the A725 and the B764 Eaglesham Road. East Kilbride's industrial economy is anchored by precision aero-engine overhaul and gas turbine mechanical tooling, alongside semiconductor wafer testing and microelectronic hardware storage and commercial distribution, freight palletising and packaging materials across Kelvin Industrial Estate, College Milton Industrial Estate and Peel Park Business Centre. In the public sector, major repositories manage NHS acute care medical case files and radiological imaging archives at Hairmyres Hospital as well as government agency central archives and international development records. These commercial hubs serve surrounding towns including Hamilton, Blantyre, Cambuslang, Rutherglen, Strathaven, Eaglesham, Clarkston and Motherwell. Storage racking across East Kilbride endures rigorous technical demands: aerospace turbine overhaul facilities and logistics centres at Kelvin and College Milton store heavy engine modules, precision jigs and high-bay palletised freight on adjustable pallet racking and cantilever frames where frequent reach-truck and VNA movements make annual SEMA racking inspections essential.

All warehouse duty holders, aerospace and electronics manufacturing directors and public sector facilities managers in East Kilbride must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including adjustable pallet racking, cantilever racking, cleanroom storage systems and archive shelving—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. In East Kilbride's safety-critical aerospace and electronics hubs at Kelvin Industrial Estate and Peel Park, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.

When our SEMA Approved Rack Inspectors audit storage systems in East Kilbride, every defect is classified using SEMA's formal Red, Amber and Green risk grading framework to provide clear engineering priorities. During our physical inspection, we measure upright verticality and bracing integrity over a one-metre gauge length against strict SEMA limits: maximum permissible deformations are 3 millimetres down-aisle, 5 millimetres cross-aisle and 10 millimetres of twist, while beam deflection under load must not exceed 1/180th of the clear span. Where severe mechanical impact, sheared baseplate anchors or permanently bowed beams create an immediate threat to structural stability, we issue a Red risk notice; the affected bay must be offloaded immediately and physically cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without presenting an immediate collapse hazard under current static loads, an Amber risk rating is assigned. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic marks within allowable tolerances are recorded as Green risks for monitoring during future audits. Our comprehensive written report includes bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, alongside practical guidance at https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.

To book an independent SEMA-approved racking inspection in East Kilbride, Scotland, call Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide