SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Eastleigh

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Eastleigh · Hampshire

Commanding the strategic intersection of the M3 and M27 motorways immediately adjacent to Southampton Airport and the South West Main Line, Eastleigh is one of the Solent region's premier centres for railway rolling stock engineering, national logistics, electronics assembly and trade distribution. Major industrial warehousing and public sector archive facilities operate across Eastleigh House (Eastleigh Borough Council), Moorgreen Hospital (West End), Barton Park Industrial Estate, Boyatt Wood Industrial Estate and Chandlers Ford Industrial Estate. Freight trunking and regional distribution fleets connect rapidly via M3 Junction 13 (Eastleigh), M27 Junction 5 (Southampton Airport), the A335 Leigh Road, the A27 Swaythling Road and the B3037 Bishopstoke Road. Eastleigh's commercial economy is powered by rail engineering support, manufacturing and Solent warehousing at Barton Park Industrial Estate, alongside commercial distribution, vehicle maintenance and trade wholesaling at Boyatt Wood Industrial Estate and national logistics, electronics assembly and corporate offices across Chandlers Ford Industrial Estate. In the public sector, local repositories manage borough council administration, planning and local tax records at Eastleigh House as well as Southern Health NHS community care, mental health and patient files at Moorgreen Hospital. These industrial hubs serve surrounding towns including Southampton, Winchester, Romsey, Fareham, Hedge End, Totton, Bishop's Waltham and Netley. Racking installations across Eastleigh face heavy mechanical demands: rail engineering depots at Barton Park store heavy bogie components, traction motors and steel profiles on cantilever and high-load pallet racking, while distribution centres at Chandlers Ford and Boyatt Wood operate high-bay narrow-aisle racking under intensive reach-truck shifts, making annual SEMA racking inspections essential.

All warehouse duty holders, rail engineering directors, 3PL operators and public sector facilities managers in Eastleigh must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including adjustable pallet racking, heavy-duty cantilever racks, drive-in blocks and archive shelving—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. In Eastleigh's busy logistics hubs at Chandlers Ford Industrial Estate or rail stores at Barton Park, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.

Our SEMA Approved Rack Inspectors provide Eastleigh businesses with a rigorous, independent structural audit graded under SEMA's Red, Amber and Green risk classification system. During our physical inspection, we assess upright verticality, frame bracing, beam deflection, connector engagement and floor fixings against SEMA codes of practice. Over a one-metre gauge length, upright deformations exceeding 3 millimetres in the down-aisle direction, 5 millimetres in the cross-aisle direction or 10 millimetres of twist violate permissible tolerances, while loaded beams must not deflect beyond 1/180th of their clear span. When severe impact damage, sheared baseplate anchors or critically buckled struts create an immediate danger of structural failure, we issue a Red risk notice; the affected bay must be offloaded immediately and cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without threatening instant collapse under current static loads, an Amber risk rating is applied. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic scuffs within allowable limits are recorded as Green risks for ongoing monitoring. Our detailed written report provides bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, supported by https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.

To arrange a SEMA-approved racking inspection in Eastleigh, South East, call Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide