SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Ebbw Vale

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Ebbw Vale · Wales

Commanding the upper Ebbw Valley along the newly duelled A465 Heads of the Valleys trunk corridor, Ebbw Vale has transformed its historic steelmaking heritage into a modern centre for automotive component manufacturing, precision engineering, regional haulage and public sector administration. Major industrial warehousing and institutional archive facilities operate across Ysbyty Aneurin Bevan, General Offices (Blaenau Gwent County Borough Council), Rassau Industrial Estate, Victoria Business Park and Coleg Gwent Blaenau Gwent Learning Zone. Freight and regional distribution fleets connect directly via the A465 Heads of the Valleys Road, the A4046 Steelworks Road, the A4048 Tredegar Road, the A4281 Rassau Road and the B4486 Bryn Serth Road. Ebbw Vale's industrial economy is powered by automotive components, precision manufacturing and Heads of the Valleys haulage across Rassau Industrial Estate, alongside commercial offices, light industrial units and local distribution at Victoria Business Park. In the public and educational sectors, major repositories manage Aneurin Bevan NHS local hospital inpatient and outpatient archives at Ysbyty Aneurin Bevan, county borough administration, steelworks heritage and public records at the General Offices, and further education, vocational training and student administration at Coleg Gwent. These commercial hubs serve surrounding towns including Tredegar, Brynmawr, Abertillery, Blaina, Rhymney, Merthyr Tydfil, Abergavenny and Blackwood. Storage racking across Ebbw Vale endures heavy industrial stresses: automotive tier-supplier plants and engineering workshops on Rassau Industrial Estate store heavy stamped pressings, battery modules, steel tooling and bulk palletised freight on adjustable pallet racking and cantilever frames where frequent counterbalance and reach-truck traffic makes annual SEMA racking inspections essential.

All warehouse duty holders, automotive component manufacturers and public sector facilities managers in Ebbw Vale must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including adjustable pallet racking, cantilever racking, drive-in blocks and archive shelving—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. In Ebbw Vale's automotive and engineering facilities at Rassau Industrial Estate and Victoria Business Park, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.

When our SEMA Approved Rack Inspectors audit storage systems in Ebbw Vale, every defect is classified using SEMA's formal Red, Amber and Green risk grading framework to provide clear engineering priorities. During our physical inspection, we measure upright verticality and bracing integrity over a one-metre gauge length against strict SEMA limits: maximum permissible deformations are 3 millimetres down-aisle, 5 millimetres cross-aisle and 10 millimetres of twist, while beam deflection under load must not exceed 1/180th of the clear span. Where severe mechanical impact, sheared baseplate anchors or permanently bowed beams create an immediate threat to structural stability, we issue a Red risk notice; the affected bay must be offloaded immediately and physically cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without presenting an immediate collapse hazard under current static loads, an Amber risk rating is assigned. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic marks within allowable tolerances are recorded as Green risks for monitoring during future audits. Our comprehensive written report includes bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, alongside practical guidance at https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.

To book an independent SEMA-approved racking inspection in Ebbw Vale, Wales, call Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide