For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.
Recognised globally as the birthplace of British aviation and a premier hub for defence technology, aerospace R&D, data centres and M3 corridor distribution, Farnborough commands a high-specification commercial and industrial footprint in North East Hampshire. Major industrial warehousing and institutional archive facilities operate across Farnborough Hospital Community Site (Frimley Health NHS Foundation Trust), Rushmoor Borough Council Council Offices Farnborough Road, Farnborough Aerospace Centre, Invincible Road Industrial Estate and Southwood Business Park. Freight and regional distribution vehicles connect rapidly via M3 Junction 4, M3 Junction 4A, the A331 Blackwater Valley Route, the A325 Farnborough Road and the A327 Summit Avenue. Farnborough's economy is powered by aeronautical wind tunnel testing, telemetry archives and flight data at Farnborough Aerospace Centre, alongside defence technology, cybersecurity hardware and avionics components and telecommunications network switching and corporate data centres across Invincible Road Industrial Estate and Southwood Business Park. In the public sector, local repositories manage NHS community health records and outpatient clinical files at Farnborough Hospital Community Site as well as borough council planning files, housing deeds and building control at Farnborough Road. These commercial parks serve surrounding towns including Aldershot, Camberley, Fleet,Frimley, Farnham, Yateley, Sandhurst and Bagshot. Storage racking across Farnborough faces exacting operational standards: aerospace and defence electronics warehouses at Invincible Road and Southwood store high-value avionics racks, flight test hardware and trade inventory on narrow-aisle adjustable pallet racking and cantilever frames where frequent reach-truck movements make annual SEMA racking inspections essential.
All warehouse duty holders, aerospace and defence contractors, trade distributors and public sector facilities managers in Farnborough must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including adjustable pallet racking, cantilever racking, multi-tier shelving and mobile archive systems—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. In Farnborough's regulated aerospace facilities and busy distribution units at Invincible Road Industrial Estate and Southwood Business Park, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.
When our SEMA Approved Rack Inspectors audit storage systems in Farnborough, every defect is classified using SEMA's formal Red, Amber and Green risk grading framework to provide clear engineering priorities. During our physical inspection, we measure upright verticality and bracing integrity over a one-metre gauge length against strict SEMA limits: maximum permissible deformations are 3 millimetres down-aisle, 5 millimetres cross-aisle and 10 millimetres of twist, while beam deflection under load must not exceed 1/180th of the clear span. Where severe mechanical impact, sheared baseplate anchors or permanently bowed beams create an immediate threat to structural stability, we issue a Red risk notice; the affected bay must be offloaded immediately and physically cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without presenting an immediate collapse hazard under current static loads, an Amber risk rating is assigned. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic marks within allowable tolerances are recorded as Green risks for monitoring during future audits. Our comprehensive written report includes bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, alongside practical guidance at https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.
To book an independent SEMA-approved racking inspection in Farnborough, South East, call Rack Safety Inspections today on 0800 654 6955.
Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.