SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Frome

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Frome · Somerset

Situated at the eastern gateway to the Mendip Hills where the A361 meets the A362 and the A36 corridor, Frome is a vibrant commercial centre for commercial printing, metalworking, packaging production, food manufacturing and East Somerset logistics. Major industrial warehousing and public sector archive facilities operate across Frome Community Hospital, Frome Town Hall (Frome Town Council), Marston Trading Estate, Commerce Park (Frome) and Wallbridge Industrial Estate. Freight hauliers and regional supply fleets navigate the town via the A361 Frome Bypass, the A362 Warminster Road, the A36 Beckington Roundabout, the B3090 Marston Road and the B3092 Maiden Bradley Road. Frome's industrial economy is powered by printing, metalworking, packaging and Somerset warehousing at Marston Trading Estate, alongside modern logistics, engineering consultancy and commercial offices at Commerce Park (Frome) and creative studios, food production and local trade supplies across Wallbridge Industrial Estate. In the public and healthcare sectors, local repositories manage Somerset NHS Foundation Trust inpatient, birthing and outpatient files at Frome Community Hospital as well as town council civic services, community governance and local records at Frome Town Hall. These commercial zones serve surrounding towns including Warminster, Westbury, Trowbridge, Shepton Mallet, Radstock, Midsomer Norton,Bath and Bruton. Storage racking across Frome endures heavy mechanical demands: print and packaging plants at Marston Trading Estate and modern distribution units at Commerce Park store heavy paper reels, metal stock and high-bay palletised freight on adjustable pallet racking and cantilever frames where frequent counterbalance and reach-truck traffic makes annual SEMA racking inspections essential.

All warehouse duty holders, print and packaging directors, metalworkers and public sector facilities managers in Frome must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including adjustable pallet racking, heavy-duty cantilever racks, drive-in blocks and archive shelving—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. In Frome's busy industrial hubs at Marston Trading Estate, Commerce Park and Wallbridge Industrial Estate, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.

Our SEMA Approved Rack Inspectors provide Frome businesses with a rigorous, independent structural audit graded under SEMA's Red, Amber and Green risk classification system. During our physical inspection, we assess upright verticality, frame bracing, beam deflection, connector engagement and floor fixings against SEMA codes of practice. Over a one-metre gauge length, upright deformations exceeding 3 millimetres in the down-aisle direction, 5 millimetres in the cross-aisle direction or 10 millimetres of twist violate permissible tolerances, while loaded beams must not deflect beyond 1/180th of their clear span. When severe impact damage, sheared baseplate anchors or critically buckled struts create an immediate danger of structural failure, we issue a Red risk notice; the affected bay must be offloaded immediately and cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without threatening instant collapse under current static loads, an Amber risk rating is applied. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic scuffs within allowable limits are recorded as Green risks for ongoing monitoring. Our detailed written report provides bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, supported by https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.

To arrange a SEMA-approved racking inspection in Frome, South West, call Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide