SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Galashiels

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Galashiels · Scotland

Commanding the Gala Water valley along the A7 and Borders Railway corridor, Galashiels is the commercial, textile design, electronics manufacturing and wholesale distribution heart of the Scottish Borders. Major industrial warehousing and institutional archive facilities operate across Borders General Hospital (Melrose, serving Galashiels), Scottish Borders Council HQ (Newtown St Boswells), Heriot-Watt University Scottish Borders Campus (Netherdale), Tweedbank Industrial Estate and Langlee Industrial Estate. Freight hauliers and regional trade fleets connect via the A7 Edinburgh-Carlisle Road, the A72 Ladhope Vale, the A6091 Melrose Bypass, the A68 Newtown St Boswells and the B6374 Melrose Road. Galashiels's commercial economy is powered by electronics manufacturing, printing and Scottish Borders warehousing at Tweedbank Industrial Estate, alongside light engineering, haulage and commercial trade supplies across Langlee Industrial Estate. In the public, healthcare and academic sectors, major repositories manage NHS Borders acute hospital patient records and clinical archives at Borders General Hospital, council headquarters governance, education and Borders public records at Newtown St Boswells, and textiles design, fashion research and higher education administration at Netherdale. These commercial zones serve surrounding towns including Melrose, Selkirk, Hawick, Peebles, Kelso,Earlston, Lauder and Innerleithen. Storage racking across Galashiels faces varied mechanical demands: trade merchants, textile mills and electronics plants at Tweedbank and Langlee store heavy yarn bales, timber packs, printed paper stock and palletised components on adjustable pallet racking and cantilever frames where frequent counterbalance and reach-truck traffic makes annual SEMA racking inspections essential.

All warehouse duty holders, electronics and textile manufacturers, trade merchants and public sector archive managers in Galashiels must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including adjustable pallet racking, cantilever racking, multi-tier shelving and mobile archive systems—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. In Galashiels's busy commercial hubs at Tweedbank and Langlee Industrial Estates or hospital archives at Melrose, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.

Our SEMA Approved Rack Inspectors provide Galashiels businesses with a rigorous, independent structural audit graded under SEMA's Red, Amber and Green risk classification system. During our physical inspection, we assess upright verticality, frame bracing, beam deflection, connector engagement and floor fixings against SEMA codes of practice. Over a one-metre gauge length, upright deformations exceeding 3 millimetres in the down-aisle direction, 5 millimetres in the cross-aisle direction or 10 millimetres of twist violate permissible tolerances, while loaded beams must not deflect beyond 1/180th of their clear span. When severe impact damage, sheared baseplate anchors or critically buckled struts create an immediate danger of structural failure, we issue a Red risk notice; the affected bay must be offloaded immediately and cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without threatening instant collapse under current static loads, an Amber risk rating is applied. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic scuffs within allowable limits are recorded as Green risks for ongoing monitoring. Our detailed written report provides bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, supported by https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.

To schedule a SEMA-approved racking inspection in Galashiels, Scotland, call Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide