SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Godalming

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Godalming · Surrey

Situated in the Wey Valley just south of Guildford along the strategic A3 London-to-Portsmouth trunk corridor, Godalming is a key West Surrey centre for light engineering, commercial printing, builders' merchants, trade warehousing and municipal administration. Major industrial storage and public sector archive facilities operate across The Burys (Waverley Borough Council), Milford Hospital (Milford), Royal Surrey County Hospital (Guildford, serving Godalming), Catteshall Lane Industrial Estate and Godalming Business Centre (Woolsack Way). Regional delivery fleets and trade suppliers connect directly via the A3 Milford Bypass, the A3100 Portsmouth Road, the A286 Haslemere Road, the B2130 Brighton Road and the B3000 Puttenham Road. Godalming's commercial economy is powered by light engineering, printing, builders merchants and Surrey storage across Catteshall Lane Industrial Estate, alongside professional services, accountancy and small business offices at Godalming Business Centre (Woolsack Way). In the public and healthcare sectors, major repositories manage borough council administration, planning and local taxation records at The Burys, NHS community rehabilitation, geriatric care and outpatient files at Milford Hospital, and Royal Surrey NHS Foundation Trust acute clinical and oncology archives. These commercial hubs serve surrounding towns including Guildford, Farncombe, Milford, Haslemere, Farnham,Cranleigh, Hindhead and Woking. Storage racking across Godalming faces high-density operational pressures: builders' merchants, print workshops and trade warehouses on Catteshall Lane store heavy timber packs, paper reels and palletised building materials on cantilever and adjustable pallet racking in compact yards where frequent forklift turns cause lower upright leg impacts, making annual SEMA racking inspections essential.

All warehouse duty holders, builders' merchants, light engineering directors and public sector facilities managers in Godalming must comply with the Provision and Use of Work Equipment Regulations 1998 and the Health and Safety Executive's HSG76 guidance on warehousing and storage. Under PUWER Regulation 5, employers have a strict statutory duty to ensure that all work equipment—including adjustable pallet racking, heavy-duty timber cantilever racks, multi-tier shelving and mobile archive systems—is maintained in an efficient state, in efficient working order and in good repair. Regulation 6 further mandates that where racking is exposed to operational conditions causing deterioration liable to result in dangerous situations, it must be inspected at suitable intervals by a competent person and after any exceptional event such as a forklift collision, with written records retained. HSG76 establishes a structured three-tier inspection hierarchy to satisfy these legal duties. First, warehouse operatives and MHE drivers must report any rack impact or structural fault immediately. Second, an appointed Person Responsible for Racking Safety must conduct documented weekly or monthly visual checks based on a site-specific risk assessment. Third, an independent SEMA Approved Rack Inspector must perform a thorough annual technical audit. In Godalming's busy trade units at Catteshall Lane Industrial Estate or civic archives at The Burys, failing to uphold PUWER and HSG76 risks HSE enforcement notices, voided insurance and catastrophic rack failure.

Our SEMA Approved Rack Inspectors provide Godalming businesses with a rigorous, independent structural audit graded under SEMA's Red, Amber and Green risk classification system. During our physical inspection, we assess upright verticality, frame bracing, beam deflection, connector engagement and floor fixings against SEMA codes of practice. Over a one-metre gauge length, upright deformations exceeding 3 millimetres in the down-aisle direction, 5 millimetres in the cross-aisle direction or 10 millimetres of twist violate permissible tolerances, while loaded beams must not deflect beyond 1/180th of their clear span. When severe impact damage, sheared baseplate anchors or critically buckled struts create an immediate danger of structural failure, we issue a Red risk notice; the affected bay must be offloaded immediately and cordoned off until repaired with genuine manufacturer components. Where damage exceeds SEMA tolerances without threatening instant collapse under current static loads, an Amber risk rating is applied. Under SEMA protocols, once an Amber bay is unloaded it cannot be reloaded until repaired, and all Amber repairs must be completed within four weeks before automatically escalating to Red status. Minor cosmetic scuffs within allowable limits are recorded as Green risks for ongoing monitoring. Our detailed written report provides bay-by-bay defect coordinates, SWL notice verification and floor fixing checks, supported by https://www.rackstor.co.uk/sema-racking-inspection-checklist for your internal safety team.

To schedule a SEMA-approved racking inspection in Godalming, South East, call Rack Safety Inspections today on 0800 654 6955.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide