Pallet Racking Inspection Livingston
Livingston houses life science labs electronics packaging and major retail supply hubs requiring annual SEMA compliance checks. For operators in Livingston, we provide independent SEMA-aligned inspections by SARI accredited inspectors, reported in writing so the condition of your racking is documented rather than assumed.
Industrial Areas and Transport Links in Livingston
The main estates and parks we visit in Livingston are Houstoun Industrial Estate, Deans Industrial Estate and Brucefield Industry Park, along with standalone warehouses and units nearby. After the Livingston visit you receive a written report listing each defect by location, with a photograph, its measured damage and a red, amber or green classification.
Racking Risks Typical of Livingston's Industries
Racking in Livingston is inspected bay by bay; these are the areas that usually need the most care.
- Sensitive and high-value products make any racking failure costly, so our report gives a prioritised repair list the site can act on straight away.
- Frames are checked for out-of-plumb against the BS EN 15635 limit, measured rather than judged by eye.
Book a SEMA-aligned inspection in Livingston
Written report within 48 hours of the visit.
Your Legal Duty in Livingston
Racking counts as work equipment under PUWER 1998. HSE guidance HSG76 and BS EN 15635 expect weekly in-house checks by a Person Responsible for Racking Safety plus at least an annual expert inspection — the part our SARI accredited inspectors deliver in Livingston. Our Livingston report gives you the evidence that this duty is being met.
See our SEMA racking inspection checklist for the measured tolerances, or read what the HSE expects.