Pallet Racking Inspection Mold
Mold features chemical packaging precision engineering and distribution requiring annual racking safety audits. Across Flintshire in the Wales, Mold included, our job is to tell you plainly what condition your racking is in and what to fix first.
Mold's Storage and Distribution Network
Locations we cover in Mold include Broncoed Industrial Estate and Bromfield Industrial Estate. Wherever your racking is installed, the inspection follows the same SEMA-aligned method. Inspections in Mold are planned to keep disruption low, working aisle by aisle while your team carries on around us.
Racking Risks Typical of Mold's Industries
Racking in Mold is inspected bay by bay; these are the areas that usually need the most care.
- Busy pick faces and fast pallet turnover put the front uprights of every run at risk from truck strikes; we measure each dent and bow against the tolerance rather than estimating it.
- Raw material, component and work-in-progress storage is prone to overloading and to beams being moved without the load rating being rechecked — both are recorded if found.
- Frames are checked for out-of-plumb against the BS EN 15635 limit, measured rather than judged by eye.
Your Legal Duty in Mold
Racking counts as work equipment under PUWER 1998. HSE guidance HSG76 and BS EN 15635 expect weekly in-house checks by a Person Responsible for Racking Safety plus at least an annual expert inspection — the part our SARI accredited inspectors deliver in Mold. Our Mold report gives you the evidence that this duty is being met.
See our SEMA racking inspection checklist for the measured tolerances, or read what the HSE expects.