For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.
Shepton Mallet sits at the heart of the Mendip Hills in Somerset, where large cider maturation cellars, dairy distribution depots, agricultural equipment suppliers and regional retail warehouses depend on heavily loaded pallet racking and shelving systems. At Charlton Industrial Estate, beverage producers, chilled food wholesalers and haulage contractors operate high-bay wide-aisle, drive-in and push-back pallet racking to support cider production logistics, dairy processing and Somerset haulage. Nearby at Townsend Shopping Park and the Bath and West Showground, back-of-house retail stockrooms, hospitality stores and agricultural event warehouses utilise adjustable pallet racking, cantilever systems and long-span shelving for regional retail operations, hospitality and consumer supply alongside agricultural exhibitions, events administration and rural trade. Within the town's healthcare and municipal estates, high-density mobile shelving and clinical supply racking manage Practice Plus Group and Somerset NHS surgical and outpatient archives at Shepton Mallet Community Hospital and unitary council Mendip area planning, revenues and civic records at Cannards Grave (Somerset Council). Commercial freight serving Shepton Mallet moves continuously via the A37 Cannards Grave Road, the A361 Frome Road, the A371 Cannards Grave, the B3136 Commercial Road and the B3135 Roemead Road. These trunk roads connect Shepton Mallet directly with surrounding towns including Wells, Glastonbury, Street, Frome, Castle Cary, Bruton and Midsomer Norton. In Shepton Mallet's cider distribution warehouses and dairy cold stores on Charlton Industrial Estate, storing heavy liquid kegs, IBCs, bottled cases and cheese blocks imposes high static loads on pallet beams and drive-in support rails, while damp or chilled washdown environments and frequent counterbalance forklift movements increase the risk of baseplate corrosion and lower upright leg impacts. Annual inspections by a SEMA Approved Racking Inspector keep Shepton Mallet's storage facilities safe and compliant.
For beverage logistics managers, dairy processors and public sector duty holders in Shepton Mallet, compliance with the Provision and Use of Work Equipment Regulations 1998 (PUWER) is a mandatory legal obligation. Under PUWER Regulation 5, every employer must ensure that storage racking—whether holding heavy cider kegs and dairy pallets at Charlton Industrial Estate, event equipment at the Bath and West Showground, or surgical archives at Shepton Mallet Community Hospital—is maintained in an efficient state, in efficient working order and in good repair. Because pallet racking is exposed to mechanical handling collisions, heavy liquid loads and chilled or humid conditions that can cause structural deterioration, PUWER Regulation 6 requires periodic inspections at suitable intervals by a competent person, with formal written records retained. The Health and Safety Executive's guidance document HSG76, Warehousing and Storage: A Guide to Health and Safety, defines the mandatory three-tier inspection hierarchy required to satisfy PUWER. First, warehouse operatives and forklift drivers must report any rack strike or visible structural fault immediately. Second, an appointed Person Responsible for Racking Safety (PRRS) must conduct and log regular internal visual checks, normally weekly. Third, an annual expert inspection must be performed by an independent specialist such as a SEMA Approved Racking Inspector. Failing to uphold this regime in Shepton Mallet's food, drink and haulage sectors risks HSE enforcement notices, invalidated insurance and prosecution.
When our SEMA Approved Racking Inspector surveys a warehouse or cold store in Shepton Mallet, every racking bay, drive-in lane and shelving run is evaluated against SEMA's engineering tolerances and graded using the traffic-light risk system. Applying a one-metre straightedge to impacted upright columns and frame bracing, our SARI engineer verifies whether deflections remain within SEMA's permissible dimensional limits: 3 millimetres for an upright bent in the plane of the beam, 5 millimetres for an upright bent in the plane of the frame, and 10 millimetres for horizontal or diagonal bracing struts. Items within these thresholds are graded Green, confirming the bay is safe for continued full-load service while being logged for monitoring at the next annual cycle. Where structural distortion exceeds those limits, or where essential components such as beam locking pins or floor anchor bolts are missing without creating an immediate danger of collapse, the defect is classified as Amber; under SEMA protocols, Amber bays must be unloaded within four weeks so certified manufacturer replacement parts can be installed, and any Amber defect remaining loaded beyond twenty-eight days automatically escalates to a Red hazard. Critical damage—including deflections exceeding twice the SEMA tolerance, torn upright profiles or disengaged beam connectors—is classified as Red, requiring immediate offloading and physical isolation of the bay. Our comprehensive written report includes bay-by-bay defect locations, load notice audits and compliance guidance linked to https://www.rackstor.co.uk/sema-racking-inspection-checklist.
Call Rack Safety Inspections on 0800 654 6955 to arrange your certified SEMA racking inspection in Shepton Mallet or anywhere in the South West.
Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.