SARI Accredited
SEMA-Aligned Inspectors
Verify on sema.org.uk
SARI No. 0100 — Mr Thelwell
SEMA Trained
Industry-recognised
Same-Day Quotes
Reply within hours
500+ UK Sites
Inspected nationwide

Pallet Racking Inspection Tiverton

For guidance on racking inspections, legal requirements and racking safety, read the SEMA racking inspection guide.

Racking inspection
Tiverton · Devon

Tiverton sits at the heart of the Mid Devon logistics and manufacturing corridor along the A361 North Devon Link Road near M5 Junction 27, where technical textile mills, agricultural supply warehouses and regional haulage depots rely on well-maintained pallet and cantilever racking. Across Kennedy Way Industrial Estate, Howden Industrial Estate and Lowman Way Business Park (Tiverton Business Park), industrial fabric manufacturers, agricultural merchants, builders suppliers and haulage contractors operate wide-aisle, narrow-aisle, fabric roll and heavy-duty cantilever racking systems supporting industrial textiles manufacturing, engineering and trade storage, commercial offices, agricultural supply and Mid Devon distribution, and light manufacturing, vehicle servicing and haulage depots. Within the town's healthcare and municipal estates, high-density mobile shelving and clinical stores safeguard Royal Devon University Healthcare NHS community inpatient and clinic files at Tiverton and District Hospital and district council administration, planning and municipal records at Phoenix House (Mid Devon District Council). Heavy goods vehicles serving Tiverton's industrial zones travel continuously via the A361 North Devon Link Road, the A396 Bolham Road, the A3126 Kennedy Way, M5 Junction 27 (Sampford Peverell) and the B3391 Cullompton Road. This strategic highway network connects Tiverton directly with surrounding towns including Cullompton, Wellington, Exeter, Crediton, South Molton, Bampton and Honiton. In technical textile stores on Howden Industrial Estate and agricultural or trade warehouses on Kennedy Way Industrial Estate and Lowman Way Business Park, storing heavy warp beams, dense fabric rolls, animal feed pallets and timber packs places substantial static loads on pallet beams and cantilever arms, while counterbalance forklifts operating in busy aisles frequently strike lower upright legs. Annual inspections by a SEMA Approved Racking Inspector are essential across Tiverton.

For textile manufacturing directors, agricultural merchants and warehouse duty holders in Tiverton, compliance with the Provision and Use of Work Equipment Regulations 1998 (PUWER) is a strict statutory obligation. Under PUWER Regulation 5, every employer must ensure that storage racking—whether holding technical textile rolls on Howden Industrial Estate, trade stock on Kennedy Way Industrial Estate, or agricultural supplies at Lowman Way Business Park (Tiverton Business Park)—is maintained in an efficient state, in efficient working order and in good repair. Because racking in manufacturing and rural distribution environments is exposed to continuous mechanical handling collisions and heavy dynamic loads that can cause deterioration, PUWER Regulation 6 requires periodic inspections at suitable intervals by a competent person, with formal written records retained. The Health and Safety Executive's guidance publication HSG76, Warehousing and Storage: A Guide to Health and Safety, defines the mandatory three-tier inspection hierarchy required to satisfy PUWER. First, warehouse operatives and forklift drivers must report any rack strike or visible structural fault immediately. Second, an appointed Person Responsible for Racking Safety (PRRS) must conduct and log regular internal visual checks, normally weekly. Third, an annual expert inspection must be performed by an independent specialist such as a SEMA Approved Racking Inspector. Failing to uphold this regime in Tiverton's manufacturing and distribution sectors risks HSE enforcement notices, invalidated insurance and prosecution.

When our SEMA Approved Racking Inspector surveys a textile store, agricultural depot or trade warehouse in Tiverton, every racking bay and cantilever frame is measured against SEMA's engineering tolerances and graded using the traffic-light risk system. Applying a one-metre straightedge to impacted upright columns and frame bracing, our SARI engineer verifies whether deflections remain within SEMA's permissible dimensional limits: 3 millimetres for an upright bent in the plane of the beam, 5 millimetres for an upright bent in the plane of the frame, and 10 millimetres for horizontal or diagonal bracing struts. Observations within these thresholds are graded Green, confirming the bay is safe for continued full-load service while being logged for monitoring at the next annual cycle. Where structural distortion exceeds those limits, or where essential components such as beam locking pins or floor anchor bolts are missing without creating an immediate danger of collapse, the defect is classified as Amber; under SEMA protocols, Amber bays must be unloaded within four weeks so certified manufacturer replacement parts can be installed, and any Amber defect remaining loaded beyond twenty-eight days automatically escalates to a Red hazard. Critical damage—including deflections exceeding twice the SEMA tolerance, torn upright profiles or disengaged beam connectors—is classified as Red, requiring immediate offloading and physical isolation of the bay. Our comprehensive written report includes bay-by-bay defect locations, load notice audits and compliance guidance linked to https://www.rackstor.co.uk/sema-racking-inspection-checklist.

Call Rack Safety Inspections on 0800 654 6955 to book your certified SEMA racking inspection in Tiverton or anywhere in the South West.

0800 654 6955

Our Brands

Rack Safety Inspections is part of the Rackstor Group of storage and warehouse specialists.

SEMA Racking Inspection Guide