Pallet Racking Inspection Burton upon Trent

Burton upon Trent is a major logistics and heavy manufacturing engine along the A38 corridor requiring regular safety sign-offs. For operators in Burton upon Trent, we provide independent SEMA-aligned inspections by SARI accredited inspectors, reported in writing so the condition of your racking is documented rather than assumed.

Racking Sites Across Burton upon Trent

From Centrum 100 to Imex Business Park, we inspect pallet racking at sites throughout Burton upon Trent. Inspections in Burton upon Trent are planned to keep disruption low, working aisle by aisle while your team carries on around us.

What We Focus On in Burton upon Trent

Based on the work carried out in Burton upon Trent, these are the points our inspectors check most closely.

• Busy pick faces and fast pallet turnover put the front uprights of every run at risk from truck strikes; we measure each dent and bow against the tolerance rather than estimating it.
• Manufacturing and engineering stores often hold heavy, awkward or non-standard loads, so we check that load notices match the configuration actually installed.
• Frames are checked for out-of-plumb against the BS EN 15635 limit, measured rather than judged by eye.

Your Legal Duty in Burton upon Trent

Racking counts as work equipment under PUWER 1998. HSE guidance HSG76 and BS EN 15635 expect weekly in-house checks by a Person Responsible for Racking Safety plus at least an annual expert inspection — the part our SARI accredited inspectors deliver in Burton upon Trent. Between expert visits, a trained Person Responsible for Racking Safety should carry out regular checks at your Burton upon Trent site.

See our SEMA racking inspection checklist for the measured tolerances, or read what the HSE expects.