Pallet Racking Inspection Stafford
Stafford supports high-tech engineering and power transformer manufacturing requiring annual safety checks. Rackstor Safety Inspections carries out SEMA-aligned pallet racking inspections in Stafford and across Staffordshire in the West Midlands, with every defect measured, classified red, amber or green, and written up in a report you can act on.
Where We Inspect in Stafford
Sites we can reach in Stafford include Tollgate Industrial Estate, Prime Point 14 and Common Road Industrial Estate; smaller yards and single units are just as welcome. Inspections in Stafford are planned to keep disruption low, working aisle by aisle while your team carries on around us.
What We Focus On in Stafford
The kind of storage found in Stafford shapes where the inspection looks hardest.
- High-throughput logistics means constant forklift traffic, so impact damage to uprights, bent beams and missing beam locks are the findings we look for first.
- Manufacturing and engineering stores often hold heavy, awkward or non-standard loads, so we check that load notices match the configuration actually installed.
- Bracing members are inspected for bends and loose bolts, which weaken a frame long before damage looks serious.
Your Legal Duty in Stafford
PUWER 1998 requires racking to be maintained in a safe condition and inspected by a competent person, and HSE guidance HSG76 recommends an expert inspection at least every 12 months. Our Stafford reports follow BS EN 15635 and the SEMA Code of Practice, so the record stands up if the HSE or your insurer asks for it. Between expert visits, a trained Person Responsible for Racking Safety should carry out regular checks at your Stafford site.
See our SEMA racking inspection checklist for the measured tolerances, or read what the HSE expects.