Pallet Racking Inspection Staffordshire — SEMA-Aligned Inspectors

From Stoke-on-Trent's ceramics heritage to Burton's brewing distribution network, Staffordshire's warehouses reflect a county built on distinct, specialised industries.

Pallet Racking Inspection Across Staffordshire

Staffordshire's position on the M6 corridor, combined with Burton upon Trent's brewing and food distribution heritage, makes it a significant Midlands logistics county.

We regularly inspect racking installations across Staffordshire, including in:

• Stoke-on-Trent
• Stafford
• Tamworth
• Burton upon Trent
• Cannock

This page is part of our nationwide SEMA Racking Inspection service, covering Staffordshire and every other UK county.

Racking Inspection Law: What Applies in Staffordshire

There is no separate "racking regulation" — the duty sits inside PUWER 1998, which treats pallet racking as work equipment like any other machine on your Staffordshire site. That means an employer must keep it safe, maintain it, and arrange inspection by a competent person at intervals suitable to the risk. HSE guidance HSG76 puts a figure on it: an expert inspection carried out by a SARI accredited inspector no less than once every 12 months, on top of your own weekly visual checks. Non-compliance is a criminal matter, carrying unlimited fines and, in the gravest cases, custodial sentences.

The SEMA Red, Amber and Green System

SEMA's three-tier damage classification underpins the whole report. Each component we assess is graded, and the grade dictates the response:

• Green — the component is in acceptable condition. No action required.
• Amber — the component is damaged. The bay must be off-loaded or its safe working load reduced until repaired within four weeks.
• Red — the component is dangerously damaged. The bay must be off-loaded and taken out of service immediately until repaired or replaced.

What the Inspection Covers in Staffordshire

Every Staffordshire inspection is carried out to HSG76 and BS EN 15635 and covers every safety-critical element of your racking installation:

• Upright frames — checked for bends, buckles, splits, twists and corrosion
• Beams and beam connectors — verified for damage and correct engagement
• Baseplates and floor fixings — inspected for lift, cracks and looseness
• Safety clips and locking pins — confirmed present and engaged on every beam
• Load notices — checked for presence, legibility and accuracy
• Floor fixings and frame protection — assessed across the installation

What Happens After Your Inspection in Staffordshire

Within 48 hours of completing your Staffordshire inspection you will receive a full written report. Every defect is photographed and described, classified red, amber or green, with a clear recommendation for repair or replacement. For amber and red defects we can provide a fixed-price repair quotation on the same day. Rackstor Safety Inspections carries out racking repairs across the UK, typically within 3–5 working days of the inspection report.

Why Staffordshire Warehouses Use Rackstor Safety Inspections

• Every finding graded green, amber or red — no ambiguity
• Inspectors accredited under SARI and working to SEMA guidelines
• Experience across APR, drive-in, narrow aisle, cantilever and mezzanine
• One point of contact for inspection, repair and load notices
• Prices agreed up front, usually quoted the same day
• Report evidence you can hand straight to an HSE inspector

Book a Racking Inspection in Staffordshire

For a fixed-price quotation on a SEMA-aligned racking inspection anywhere in Staffordshire, call 0800 654 6955 or use the form below. We respond the same day.